Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for 909 RP828-AUOXY
- Page 1 INSTRUCTION MANUAL RP828-AUOXY 300 AMP Portable Lithium-Ion Jump Starter...
-
Page 2: Table Of Contents
CONTENTS Warranty Warranty For full details please visit us at www.909.com Introduction Environmental protection Specifications Instruction manual Safety instructions Specific safety instructions for jump starters Additional safety instructions for batteries and chargers Know your product Charging / recharging Operation guide... -
Page 3: Introduction
3. Assure that this jump-starter is correctly connected special care to heed the Cautions and Warnings. to the battery. Your 909 appliance has many features that will make your 4. User must use output clamps provided by manufacturer job faster and easier. Safety, performance, and only. -
Page 4: Specific Safety Instructions For Jump Starters
Do not open body casing. There are no user-serviceable Explosive gas may be vented from the lead acid batteries • • parts inside. when charging and under extreme conditions battery leakage may occur. Ensure the area is well ventilated Do not operate the appliance in explosive atmospheres, •... -
Page 5: Additional Safety Instructions For Batteries And Chargers
Excessive engine cranking can damage the vehicle‘s • Additional safety instructions starter motor. for batteries and chargers If the engine fails to start after the recommended number Batteries of attempts, discontinue jump-starting procedures and look for other problems that need to be corrected. •... -
Page 6: Know Your Product
Know your product 1. Unit On/Off button 2. Area light On/Off button 3. LCD screen 4. USB power socket 5. LED area light 6. 12V AC/DC charging socket 7. Jump starter power button 8. Cord storage 9. Positive (+) red clamp 10. -
Page 7: Charging / Recharging
Charging / recharging Note: If the unit on/off button is pressed while the AC charging adapter is plugged in, the LCD screen will display Lithium-Ion batteries require routine maintenance to the following: ensure a full charge and long battery life. All batteries lose energy from self-discharge over time and more rapidly when they are at higher temperatures. - Page 8 4a. Connect positive (+) red clamp to vehicle battery’s positive terminal. 4b. Connect negative (–) black clamp to chassis or a solid, non-moving, metal vehicle component or body part. Never clamp directly to negative battery terminal If the surrounding ambient temperature drops to an or moving part.
- Page 9 8. If there are no indications of fault (as outlined in the turn the unit off; disconnect the jump-start system’s leads “Important” section above), turn on the vehicle’s ignition and contact a qualified technician to investigate why the and crank the engine in 5-6 second bursts until the engine did not start.
-
Page 10: Troubleshooting
Some household USB-powered electronics will not operate with this unit. Make sure all appliances are disconnected from the USB power port and the unit is turned off when the unit is being recharged or stored. Troubleshooting Unit not charging • Make sure all of the unit’s functions are turned off.
Need help?
Do you have a question about the RP828-AUOXY and is the answer not in the manual?
Questions and answers