Advertisement
Quick Links
TrackerGuard GPA Quick start guide
SOS button. Press for 3
seconds to send SOS
SMS and call stored
numbers
Microphone
Micro USB
used for charging
LED indicators
• For the first time use, please fully charge the battery for around 8 hours, using the USB charger.
• When charging, the RED Power LED will be on (solid). After fully charged, the power LED will be off.
• Turn on the unit by pressing the on/off button for 3 seconds. • To get an initial location, use
outdoors or near a window so the TrackerGuard Aqua may fix onto the satellites.
The Device SIM card number can be found on the box Barcode Label. Example 4471234567890.
ON/OFF & CALL
CALL button. To call stored number press for 3 seconds
ON/OFF button. To turn on/off press for 3 seconds
Advertisement
Summary of Contents for TrackerGuard GPA
- Page 1 • Turn on the unit by pressing the on/off button for 3 seconds. • To get an initial location, use outdoors or near a window so the TrackerGuard Aqua may fix onto the satellites. The Device SIM card number can be found on the box Barcode Label. Example 4471234567890.
- Page 2 TrackerGuard GPA Quick start guide Set up to 3 authorised numbers - Send text to device SIM Card Number GSM LED - GREEN Command: A1 (send SMS with text “A1” from 1 authorised mobile) Connected to GSM Fast flash every Device will reply with the message: “Set mobile number 1 OK!”...
Need help?
Do you have a question about the GPA and is the answer not in the manual?
Questions and answers