Contents Contents GENERAL INFORMATION Main Features For your Safety Unpacking General Operation Front Panel Rear Panel INSTALL ATION MENU INFORMATION 1. Search 1.1 Auto Search 2. Channel 2.1 EPG Information 2.2 TV Manager 2.3 Radio Manager 2.4 Timer Manager 3. Setting 3.1 Display 3.2 AV Setting 3.3 Lock...
GENERAL INFORMATION GENERAL INFORMATION This user's guide covers the installation of the DCR and the necessary steps to implement various features. This also explains special features available only in this DCR in detail, which will allow you to make full use of these features. Information confirmed in this document is subject to change.
GENERAL INFORMATION GENERAL INFORMATION For Your Safety Keep the receiver away from flower To avoid electric-shock hazards, do vases, tubs, sinks, etc., in order to not open the cabinet, refer servicing avoid damaging the equipment. to qualified personnel only. Do not expose the receiver un-der Do not block ventilation holes of the the sunlight.
GENERAL INFORMATION GENERAL INFORMATION Unpacking(Optioanl) Remote Control Batteries Audio/Video cable General Operation Throughout this manual you will notice that the everyday operation of the receiver based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions.
GENERAL INFORMATION GENERAL INFORMATION Function Standby ON/OFF When watching a channel, mute the sound MUTE Enter number of the required menu item or select a channel number to watch TV/RADIO Switches between TV and Radio mode Switches back to previous channel BACK Display the favorite channel list Display audio window...
GENERAL INFORMATION GENERAL INFORMATION Front Panel Rear Panel Rear Panel CONNECT TO USB DEVICE CONNECT TO AUDIO R/L TO TV OR AUDIO TUNER POWER SUPPLY CONNECT TO A DIGITAL AMPLIFIER COMPOSITE VIDEO BROADCAST SIGNAL CONNECT TO TV SET HDMI INPUT CABLE IN: CONNECT TO CABLE SIGNAL LOOP OUT: CONNECT TO ANOTHER RECEIVER The picture is only for reference,please make the object as the standard.
INSTALL ATION INSTALL ATION Connecting to TV using RCA support VIDEO AUDIO Connecting to TV using HDMI support The picture is only for reference,please make the object as the standard.
Once you properly installed and connected cables of the receiver, the menu will be displayed. This menu consists of 5 major main menus as follow. - Search - Channel - Setting - Service - Account During the installation the OK key confirms a selection Use the CH+,CH- key to move upwards and downwards from one line to another line and use V-, V+ key to move from main menu to sub menu and move from left side to right side or versa.
2. Channel This menu consists of 4 major sub-menus as follows. - EPG Information - TV Manager - Radio Manager - Timer Manager 2.1 EPG Information Press red key to enter single EPG mode, press OK key to book program. Press INFO key to pop up information window.
3. In operation list select lock item, then move the cursors to program list to select the program and press OK key to lock the selected program. It will appear in selected list. Select the program in 2nd list and press OK key again it will be unlocked and disappeared in this list.
3. Setting This menu consists of 5 major sub-menus as follows. - Display - AV Setting - Lock - Power - Factory Default 3.1 Display 1. SD Video Mode: Select among Auto, PAL and NTSC. 2. Display Scale: Select among 4:3, 16:9 and Auto. 3 .
3.3 Lock Before entering into the Lock window, you need input the correct password. The default password is 0000. 1. Menu Lock: Press V+ ,V- keys to select between Off and On. If select "On" , you can not enter into the most window before entering the password.
4. Service This menu consists of 4 major sub-menus as follows. - Media Player - Storage Device Setup - PVR Setup - USB Speed Check 4.1 Media Player In Media Player menu you can see the program you recorded. Media Player: Press red key to watch in full screen mode.
Record: Before start recording, please make sure USB storage device is in plugin status. In normal mode, press RECORD key on RCU, then the " " symbol will appear on the screen means begin record. During recording press STOP key to pop up a dialogue: "Are you sure to stop the current recording?"...
5.3 CA Menu Show CA Information and Smart Card information. 5.4 Mail List Press CH+,CH- key to select the mail you received,and press OK key to read it. Press EXIT key to quit. Press blue key to delete the mail you selected Press red key to delete all mail.
6. Hot Key 6.1 Info Press INFO key to pop up the Info bar. Press INFO key again to pop up the current program info, thirdly press to pop up subsequent program info. 6.2 EPG Same operation as 2.1 EPG Information. 6.3 Number Use the numeric keys (0-9) to input the number of the desired channel.
Page 18
6.8 OK 1. During the viewing or listening, press OK key to pop up the TV program list or the Radio program list. Press red key to all list window. 2. Press CH+,CH- keys to select the channel up or down, and then press OK key to play this channel in full-screen.
TROUBLE SHOOTING TROUBLE SHOOTING Problem Possible causes What to do The display on the front Check that the main cable is plugged into Main cable is not connected. panel does not light up. the power socket. No sound or picture, but the receiver is in standby mode.
Need help?
Do you have a question about the HD3000 and is the answer not in the manual?
Questions and answers