Advertisement
Diagram 2
Fitting Ceiling Attachment
Diagram 3
Final position
Lighting for all the senses.
Terra Spot
Assembly Instructions EU/USA
2/2
2
Ceiling Hole
Locate centre of spotlight location and drill 64mm
diameter hole in the ceiling.
Ensure the ceiling is minimum 12mm thick. Make sure
the ceiling is decorated prior to install.
3
Fit Ceiling Attachment
Take the Ceiling ring attachment (1) and squeeze the
metal wings on the sides and push the ring in to the
ceiling hole. The wings will grip the ceiling. Ensure the
ring is fully inserted and securely fitted.
4
Connect Electrics
Prior to installing the spot light connect the lamp to the
electrics using the provided junction box (2). Test the
light is working prior to inserting in to the ceiling
Note!
•
Ensure the Mains Power is off when connecting
the lamp
•
Use a professional electrician
5
Insert Spot Light
Now insert the main body of the spot light through the
ceiling attachment ring (1) and push the spot tight up
against the ceiling.
The rubber gasket (7) should be compressed against the
ceiling and form a water tight seal.
Note!
•
Handle the ceramic face of the spot with care as
ceramic can break if excessive force is applied.
6
Replacing the lamp
Carefully grip the terracotta face with all five fingers and
gentle pull the face directly down. The body of the lamp
will detach from the ceiling ring.
Replace the lamp and repeat step 5.
info@handandeyestudio.co.uk
handandeyestudio.co.uk
Advertisement
