Advertisement
Quick Links
Advertisement
Summary of Contents for Harmony Collection LTM-3L-22 Series
- Page 1 3-MOTOR ELECTRIC HEIGHT ADJUSTABLE TABLE LTM-3L-22-xx/EL Assembly and instructions...
- Page 2 Please read this document carefully. If this desk is sold, please provide this manual to the buyer. Caution! Make sure no obstacles are in the desk’s path. Make sure the desktop is not touching any walls. Make sure all cords are appropriate length to accommodate the change in height. Children should only operate desk under adult supervision.
-
Page 3: Parts Included
Parts Included Frame Table 1 Table 2 *2x extra holes Please note that C & D as well as E & F are preassembled. Electrical components Hardware Control Box (Preassembled) Cables Power Cord Control switch... - Page 4 Assembly instructions Step 1 Choose the desired table configuration. Step 2 Parts C & D, E & F are preassembled. You must adjust them to approximately match the length of your table. Do not tighten the screws completely before the final adjustments.
- Page 5 Table 1 Étape - Step 4 Step 3 Complete this step for both legs. Table 2 Step 4 Add the side for the return.
- Page 6 Table 2 Step 5 Add the last ‘‘G’’ post to the return side. Step 6 Install the end supports. WARNING: The longer one ‘‘A’’ goes on the primary side (Table 1), and the shorter one ‘‘B’’ goes on the side of the return (Table 2).
- Page 7 Step 7 Install the feet as well as the adjustable glides. Step 8 Please center the supports for best results. We recommend to secure the wood panels together with brackets (not included). Center the supports on the panels. Adjust the lengths of the center supports.
- Page 8 Step 9 Install the panels on the structure. Step 10 Install the controller so it does not exceed the table top. In the event of a power outage or if the power cord is unplugged, a manual reset may be necessary. See Step 9 for details. Up-down.
- Page 9 Step 11 Install the control box next to the right leg. Make sure that the outlets are facing the left leg. When puting the table on it’s leg, please ask a second person to help you. Make sure that the wires will not obstruct the movement of the table. Control Box 3x Cables Control switch.