Hammond Manufacturing PMHGY Series Assembly Instructions

PMHGY - SERIES
ASSEMBLY INSTRUCTIONS FOR
PMHGY - EJ and 1414
1
2
3
SOLD
SEPERATELY
EJ MOUNTING HOLE
ITEM No. DESCRIPTION
1 PMV....GY - Vertical Rail
2 PMH..GY - Horizontal Rail
3 3/8"-16 X 3/4" Bolt ZP
4 3/8" Split Lock Washer ZP
5 3/8"-16 Hex Nut ZP
6 PMSTRAP
7 5/16"-18 X 1" Bolt ZP
8 5/16" Split Lock Washer ZP
9 5/16"-18 Hex Nut ZP
TOOL BOX
Tape
Measure
5
4
1414
MOUNTING HOLE
QTY
1
2
2
2
2
4
4
4
4
1/2" Socket
9/16" Socket
Wrench
Wrench
PAGE 1 OF 2
SOLD
SEPERATELY
7
POLE
ASSEMBLY INSTRUCTIONS:
A) Measure distance between vertical mounting centers on enclosure.
B) Layout PMH..GY (item 2) centered on PMV....GY (item 1) with the distance
measured in step A. EJ enclosures must use top hole, 1414 enclosures use the center
C) Use 3/8" x 3/4" bolt (item 3) with split lock washer (item 4) and 3/8" nut (item 5) to
PMH..GY (item 2) to PMV....GY (item 1). Tighten down.
D) Attach assembly to pole using PMSTRAP40 (up to 10" diameter pole) or
PMSTRAP55 (up to 12" diameter pole).
E) Attach enclosure to pole mount assembly using 5/16" x 1" bolts (item 7) 5/16" split
lock washer (item 8) and 5/16" hex nut (item 9).
BUL86393
REV. B
6
hole.
HAMMOND
MANUFACTURING
www.hammondmfg.com
9
8
TM