Advertisement
Quick Links
Advertisement
Summary of Contents for Brading Fabrication SolaraSky Skylight
- Page 1 INSTALLATION GUIDE Skylight...
- Page 2 INSTALLATION GUIDE Skylight SolaraShade ™ Straight SolaraShade ™ Curved SolaraShade ™ Cathedral SolaraShade ™ Conservatory Rectangle & Triangle SolaraSky ™ Skylight...
- Page 3 INSTALLATION GUIDE Skylight Headrail Fabric Handle Siderail Movable Rail Tension Cord Cord Clamping Screw Side And Washers Rail Slip Knot Bottom Rail Tension Spring Expanded Hardware Diagram...
- Page 4 Troubleshooting Care and Cleaning INTRODUCTION Thank You for purchasing SolaraSky by Brading Fabrication. Your new shade has been custom built for you from the highest quality materials. Once in your skylight, it will provide you with years of trouble-free use.
- Page 5 INSTALLATION GUIDE MOUNT THE SIDE TRACK Inside Mount MOUNT THE SIDE TRACK Skylight Narrow Flange Of Side Track At Inside Mount Back Of Shade Narrow Flange Of Top View: Window Side Track At Non-Vertical Shade Casement Back Of Shade Wide Flange MOUNT THE SIDE TRACK Top View: Window...
- Page 6 For outside mount applications, use the installation brackets to mount the INSTALLATION GUIDE anchor rail. For inside mount applications, attach the anchor rails directly to the sill with screws. Skylight Inside Mount Applications The depth required for a fully recessed mount depends upon the application. NOTE: Add the dimension of obstructions such as window cranks or handles to the minimum depth.
- Page 7 Minimum 1" Minimum INSTALLATION GUIDE " Minimum 1" Minimum Skylight NOTE: Make sure the headrail brackets and anchor rail brackets are horizontal and parallel. Make sure the brackets for each rail are aligned at the same height. NOTE: Make sure the headrail brackets and anchor rail brackets are horizontal and parallel.
- Page 8 INSTALLATION GUIDE Skylight ADJUST THE SHADE ADJUST THE SHADE Tension Cords Tension Cords ADJUST THE SHADE The moving rail should slide easily, yet hold its position when it is released. Adjust the ADJUST THE SHADE The moving rail should slide easily, yet hold its position when it is released. Adjust the tension cords in the anchor rail if the moving rail does not slide properly.
-
Page 9: Final Assembly
INSTALLATION GUIDE Skylight FINAL ASSEMBLY Fit the fabric strip into the anchor rail to cover the internal hardware. Attach the handle to the moving rail using the screws provided. REMOVE THE SHADE Fully raise the shade. Unscrew the tab screw on each bracket to release the headrail. -
Page 10: Care And Cleaning
INSTALLATION GUIDE Skylight CARE AND CLEANING Honeycomb shades are made of an anti-static, dust-resistant fabric which repels dirt and dust. For most honeycomb fabrics, the following options are available if your shade needs cleaning. Dusting Regular light dusting with a feather duster is all the cleaning that is needed in most circumstances. - Page 11 www.solarasky.com solarashade.com info@solarashade.com 1-800-483-5550...
Need help?
Do you have a question about the SolaraSky Skylight and is the answer not in the manual?
Questions and answers