Table of Contents
Advertisement
DELAY
This is a model of one of the most respected analogue tape echo machines ever made.
In the original, the "echo" is produced by a playback head and the exact "delay time" is
set by varying the motor speed. Many professionals prefer these "lo-fi" units because of
the warm, dark echoes they produce.
TAP
EDIT 1
EDIT 2
[TAP+EDIT 1]
EDIT 3
[BYPASS+EDIT 1]
HINT: In the CHORUS+DELAY combination effect, the FEEDBACK parameter is already
set to the optimal value.
WARNING! If you crank up the FEEDBACK too much, an uncontrollable, cascading "run-
away" of echoes will occur. So, use your ears and your common sense when setting this!
REVERB
A model of the most popular spring reverb system used in guitar amps.
TAP
EDIT 1
EDIT 2
[TAP+EDIT 1]
EDIT 3
[BYPASS+EDIT 1]
HINT: In combination effects, the TIME and HI DAMP parameters are already set to opti-
mal values.
"TIME"
Sets the delay time in a range of 1...1486 [ms].
"MIX"
Adjusts the mix amount of the delay.
"TIME"
This lets you use the knob to make fine adjustments
to the parameter.
"FEEDBACK"
Adjusts the amount of feedback.
"TIME"
Sets the reverb time in a range of 0.8...8 [seconds].
"MIX"
Adjusts the mix amount of the reverb.
"TIME"
This lets you use the knob to adjust the reverb time.
"HI DAMP"
Adjusts the dampening of the high-frequency range.
23
Hide quick links:
Advertisement
Table of Contents
