Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ACE PRODUCTS Manuals
  4. GPS
  5. ACE-TL210
  6. User manual

ACE PRODUCTS ACE-TL210 User Manual

Gps/gsm motorcycle tracker
Hide thumbs

Advertisement

Quick Links

Download this manual
User Manual
(ACE-TL210 GPS/GSM Motorcycle Tracker )

Advertisement

loading

Summary of Contents for ACE PRODUCTS ACE-TL210

  • Page 1 User Manual (ACE-TL210 GPS/GSM Motorcycle Tracker )
  • Page 2 1．Introduction The ACE-TL210 GPS/GSM Tracker is a Vehicle Positioning Device what based on GPS and GSM/GPRS technology . It's can transmit the Longitude and Latitude coordinates to your Mobile Phone by SMS. And you can find the detail location of this unit on the Google Map or other Map Software.
  • Page 3 3.1. Specification MTK Case, support 900/1800(850/1900 can option) GSM module Support the TCP protocol GPS Chipset JRC chipset GPS sensitivity -164dB C/A Code 1.023MHz chip rate Channels 210 channel all-in-view tracking GPS frequency L1,1575.42MHz GPS Position Accuracy 2.5 meters, CEP GSM Position Accuracy Later will realize Velocity Accuracy...
  • Page 4 Red LED---indicate charge sate State Means constant Lighting charging No light charging was completed Green LED--- indicate the GPS signal state State Means No Lighting Working, but no location Flashing Working and has located 4．Products Appendix 1）ACE-TL210 GPS/GSM Vehicle Tracker...
  • Page 5 6. Installation Diagrame The external 5 wires of ACE-TL210 GPS/GSM tracker are as follows. Red for the 12V car power wire, connect to the car battery anode; Black for the earth GND, connect to the car battery cathode;...
  • Page 6 (1-3) OK) to the sender. The Work Mode of ACE-TL210 ACE-TL210 have two work mode---SMS and GPRS Mode. If the users only need track the car by mobile phone, and check the position (latitude and longtitude) in Google Map, or control the oil and...
  • Page 7 Format：710+ user password (4 figures) eg：7100000 Explanation: When ACE-TL210 tracker receives the SMS and confirms the user password correctly, it switches to the GPRS application mode. After the success, it will send the confirmation messages (SET MODE OK，CURRENT MODE：GPRS) to the sender.
  • Page 8 ID: IMEI STATE: Message state Effective data format: Lat: +22.50500 Long: +114.01000 Speed: 0.00KM/H Direction: 315.00 Date: 2008-04-25 Time: 16:39:45 BS: 25ee0dff Fix: A ID: 353686009002030 STATE: SMS Invalid data format: Lat: +22.50500 Long: +114.01000 Speed: 0.00KM/H Direction: 315.00 Date: 2008-04-25 Time: 16:39:45 BS: 25ee0dff Fix: V...
  • Page 9 3) You can get the latitude & longitude date by sending “666+password” SMS command code to the GPS tracker ACE-TL210 . Input the latitude and longitude that you receive from SMS and click on search button, the Google earth will display the location map for you.
  • Page 10 Fix: A ID: 353686009002030 STATE: SMS Search the position on the Google map, in relevant position input： +22.50500 +114.01000 Obtain the following picture: Or you can use local map software on PDA or car navigation device, input the position date. (Note: pay attention to change the position date format)
  • Page 11 2. Cut-off electricity and oil function 1) Open the cut-off electricity and oil function a. Command format: 900 + user password b. Confirm command format: 901 + user password c, Directly Command : 940+ user Password Note : 940=900+910 , the unit will implement this command at once after receive this command. Description: Due to the command with a certain degree of risk, so needs to do a more confirmation operation.
  • Page 12 222 + user password 4 For example: 2,220,000 Description: When the ACE-TL210 receiving the order, confirm the user password is correct, open the GPS power, after the success of the sender to send the confirmation to the "GPS ON OK . "...
  • Page 13 333 + user password 4 For example: 3,330,000 Description: When the ACE-TL210 receiving the order, confirm the user password is correct, close the GPS, after the success of the sender to send the confirmation to the "GPS OFF OK" .
  • Page 14 To turn off gps30 minutes will set the S030, but not set to S30. (2) Hzz opened GPS to set the total time, not less than Lyy. (3) 199 instruction set of the parameters are not lost restart, the reset will (4) Only in exceptional power-saving mode, the device can be s parameters of the timer switch 199, GPS, other modes will not.
  • Page 15 60, the value of XX minus 60, the unit is the hour, that is 61 to 1 hour, 62 for 2 hours, and so on. When ACE-TL210 receiving the order, confirm the user password is correct, ACE-TL210 set the current time as the initial time of time, XX for the interval to confirm the sender's mobile phone to send text messages "TIMER START, REPEAT INTERVAL: <X>...
  • Page 16 Explanation: One of 3 telephone numbers stored in advance calls in, and hangs up after ringing 2-5 times, then the ACE-TL210 will send the location information to this number such as 4.1.6 to this number, the information state item automatically updates STATE: CALL. But other incoming...
  • Page 17 Electronic fence takes the set coordinates as the center, the set radius parameters to determine the scope of the fence. When open this feature, once the ACE-TL210 beyond the scope of the set fence, it will send location information as to 4.1.6 to the 3 preset numbers. The information state item automatically updates STATE: OS.
  • Page 18 (on / off / adaptive). 1.1>. Open the electronic fence: 211 + user password when the ACE-TL210 received confirmation of the order after the user password open the e-fence to the right side to return the confirmation messages sent: GEO-FENCE ON.
  • Page 19 1.2> turn off the electronic fence: 210 + user password when the ACE-TL210 received confirmation of the order the correct user password and close the electronic fence to return to the sender is recognized short message: GEO-FENCE OFF. Note: 1, the fence can not exceed the radius of the domain, the fractional part of the right of zero must enter zeros.
  • Page 20 9. Open the e-fence: 211 + user password When ACE-TL210 receiving the order to confirm the user password is correct to open the electronic fence to return to the sender to confirm the short message: GEO-FENCE ON.
  • Page 21 "SET RATE LIMIT: X. When the speed alarm function is turned on, ACE-TL210 began to read the speed of GPS data and comparison with X real-time. If the GPS speed is greater than in X, the instructions at this time speeding, ACE-TL210 immediately sent to the No.
  • Page 22 1) For Charge Description: ACE-TL210 check the state of ACC of the power through the ACC Cable,so the ACC ON when the car is moving, and the power of the car will recharge to the unit. and the ACC Off when the car is parking, and the power of the car will not recharge to the unit.
  • Page 23 GPS Data is Available or Valid . when the ACC is OFF, if ACE-TL210 checking the car over the defence,in the SMS Mode, the ACE-TL210 will send a message to the pre-saved numbers what the state is "STATE:ACC OS" (the unit will send the current position to the server,the state is "ACC OS",and call the pre-saved numers,...
  • Page 24 16. Updata on the Air 1). Formate : !-Password Eg: !-0000 Note: when ACE-TL210 receive this command and confirm the password is correct, the unit will restart and enter FTP Server to download procedure automatically.after succesful, the unit will restart again, and it's ok.
  • Page 25 18, Location to return a single address instruction in Chinese Instruction format 1:667 + user password for example: 6670000 instruction format 2:667 + user password + MAP example: 6670000MAP instruction format 3:667 + user password + MAP, WWW, HHH, ZZ example: 6670000MAP, 640,480,15 Description: When the device receives the instruction 1, and confirm the correct user password immediately after reading the GPS information, recognition information is valid, send the address...
  • Page 26 immediately after the read GPS information, recognition information is valid, send the current location of the Google Maps screenshot of the website, the screenshots default resolution of 240 * 320. If you think that image is too small, you can send commands 2, custom picture size, in which the representative picture of the width of the WWW, HHH on behalf of picture height, ZZ for the zoom level, you can set the size to comply with the resolution of your phone.
  • Page 27 APN to choose format 1 or 2 to use set. Explanation2: When ACE-TL210 tracker receives the instruction and confirms the user password correctly, updates the access point name to the new access point name. After the success, it will send the confirmation messages to the sender.
  • Page 28 N, at least is 1, at most is 50. When ACE-TL210 receive the command, and confirm the password is correct, then ACE- TL210 will send a feedback message to the sender what is SET GPS SAMPLING TIME AND QUANTITY OK .
  • Page 29 Format: *new numbers with 4-20 figures * user password (4 figures) *location number (1-3) ** eg: *13900000000*0000*1** Explanation: You can store 3 telephone numbers at most in advance 。 When ACE-TL210 tracker receives the instruction and confirms the user password correctly, substitutes the new number for the existing number.
  • Page 30 3.1 Open the GPS instruction Format: 222+user password (4 figures) eg: 2220000 Explanation: When ACE-TL210 tracker receives the instruction and confirms the user password correctly, opens the GPS power. After the success, it will send the confirmation messages (GPS ON OK) to the sender.
  • Page 31 correctly, reads the GPS information. No matter whether effective, the information with the replying base station which is the set of the original software will be sent to the sender. Data format: Lat: Latitude Direction (+/-) Latitude Value (Accuracy for 5 after the decimal point) Long: Longitude Direction (+/-) Longitude Value (Accuracy for 5 after the decimal point) Speed: Speed KM/H...
  • Page 32 Format：#802#user password#new service password#old service password ## eg：#802#0000#1111#0000## Explanation: When ACE-TL210 tracker receives the instruction, confirms the user password and old service password correctly, changes the service password to the new service password. After the success, it will send the confirmation messages to the sender. The content is “CHANGE PASSWORD OK”...
  • Page 33 Calling ON format: 151 + user password (4 figures) eg: 1510000 Explanation: When ACE-TL210 tracker receives the instruction to close calling and confirms the user password correctly, close the calling function (including the SOS, alarm when across the fence), after successfully, sent the confirm information "SET VOICE CALL: OFF"...
  • Page 34 Electronic fence takes the set coordinates as the center, the set radius parameters to determine the scope of the fence. When open this feature, once the ACE-TL210 beyond the scope of the set fence, it will send location information as to 3.1.5 to the 3 preset numbers. The information state item automatically updates STATE: OS.
  • Page 35 According to the input formats different of coordinates, user can choose the format as follows instructions to operate. Format1：003+ user password E/Wdddmm.mmmmN/Sdd.mmmmRzzz.z eg: 003xxxxE11406.0024N2233.4230R1 Explanation: E-- east longitude; W-- west longitude; N-- north latitude; S-- south latitude. In this example, uses E and N, please according to the actual geographical position choose corresponding coordinate form to set.
  • Page 36 A message to the sender which is "ERROR GPS DATA, TRY AGAIN LATER" 1.1>. Open the electronic fence: 211 + user password when the ACE-TL210 received confirmation of the order after the user password open the e- fence to the right side to return the confirmation messages sent: GEO-FENCE ON.
  • Page 37 further instructions or reset operation. (4) After reset, the value of latitude and longitude marked with 0. Fence is turned off. 2.1> Open rectangular electronic fence Open all rectangular electronic fence instruction format: 311 + user password for example: 3110000 Open a single rectangular electronic fence instruction format: 311 + user password + GX for example：3110000G5 Description: This command is used to open all the electronic fence and open a single rectangular...
  • Page 38 Command : 211 + user password After set successfully, it will send the confirmation messages “GEO-FENCE ON” to the sender. 14. Close the Electronic Fence: Command : 210 + user password After set successfully, it will send the confirmation messages “GEO-FENCE OFF” to the sender. 15.
  • Page 39 1.1 state is "STORAGE" 18. Low Voltage Warning When the ACE-TL210 ’s working voltage lower than the configuration, the unit will read the GPS information, whether or not effective, immediately the unit will send the format as 4.1.6 location information to the three stored numbers, the information state item automatically updates STATE: LP.
  • Page 40 1) For Charge Description: ACE-TL210 check the state of ACC of the power through the ACC Cable,so the ACC ON when the car is moving, and the power of the car will recharge to the unit. and the ACC Off when the car is parking, and the power of the car will not recharge to the unit.
  • Page 41 ACC is OFF, if ACE-TL210 checking the car over the defence,in the SMS Mode, the ACE-TL210 will send a message to the pre-saved numbers what the state is "STATE:ACC OS" (the unit will send the current position to the server,the state is "ACC OS",and call the pre-saved numers, the 150/151 comamnd will affect the unit that whether call the pre-saved numbers.
  • Page 42 1), command format:! - User password For example:! -0,000 Description: When the ACE-TL210 receiving the order to confirm the user password is correct, the automatic restart and automatically log on FTP server to download program. When the update again after a successful reboot into normal use. Note: FTP address is stored within...
  • Page 43 http://www.gps069.com/cngps/mapaddr.asp?lng=114.09998&lat=22.55709&z=15&w=640&h=480 25, a single positioning link back to Google Maps screenshot command Instruction format 1: 668 + user password for example: 6680000 instruction format 2: 668 + user password, WWW, HHH, ZZ example: 6680000,999,999,15 Description: When the device receives the instruction 1, verify that the correct user password immediately after the read GPS information, recognition information is valid, send the current location of the Google Maps screenshot of the website, the screenshots default resolution of 240 * 320.
  • Page 44 HFR: hand free MTPRF: monitor（SILENT）/（NORMAL） BS: basestation GEO-FENCE=ON/OFF longitude,longitude data latitude, latitude data Radius （ at least ACE-TL210 GPS/GSM Vehicle Tracker User Manual V 2.0 0.1KM） GEO-FENCE STATE:RS/OS DEFENCE：ON/OFF the switch of alarm when cut off the electricity VOICE：ON/OFF the switch of calling POWER：ON/OFF the switch of cut oil and power...
  • Page 45 State mark Corresponding identity Status 666 one-time request 4XX regularly send TIMER Phone Location CALL Answer ANSWER Active assistance Power failure alarm alarm A fence Finalists selected Speed alarm OVERSPEED Safe speed SAFESPEED Historical Data Upload STORAGE Low power alarm 806 single-hair positioning From time to time to go car AUTO...
  • Page 46 667+ Password Back Chinese position information 667+ Password,MAP Return address information plus screenshots Chinese 667+ Password,MAP,WWW,HHH,ZZ Back to the Chinese address information plus screenshots (screenshot to change the size and scale) 668+ Password Back Google Maps Links Screenshots 668+ Password,WWW,HHH,ZZ Back to Google Maps screenshot link (screenshot to change the size and scale) 669+ Password...
  • Page 47 #808# Password ## From all the historical data #809# Password #x#y## From time to time set the throttle stop mode *RESET# Password ## Reset all the configuration information after reboot *RESTART# Password ## Restart device *GTAN# Read all the current numbers, passwords *GTAS# Read current settings !- Password...