Entering the password
When the car radio is turned on, in the
case of a code request, the message
"CODE" will appear on the display for ap-
proximately 2 seconds, followed by four
dashes "----".
The password is made up of four numbers
from 1 to 6, each corresponding to one of
the dashes.
To enter the first code number, press the
button corresponding to the preset sta-
tions (from 1 to 6). Enter the other code
numbers in the same way.
If the four numbers are not entered with-
in 20 seconds, the message "CODE" will
appear again on the display for 2 seconds,
followed by four dashes "——". If this oc-
curs, it is not considered an incorrect
code entry.
After the fourth number is entered (with-
in 20 seconds), the car radio will start to
function.
If an incorrect code is entered, the car ra-
dio will emit an acoustic signal and the
message "CODE" will appear on the dis-
play for 2 seconds, followed by four dash-
es "----" to prompt the user to enter the
correct code.
Each time an incorrect code is entered,
the wait time will increase progressively
(1 min, 2 min, 4 min, 8 min, 16 min, 30
min,1h, 2h, 4h, 8h, 16h, 24h) until a max-
imum time of 24 h is reached. The wait
time will be shown on the display with the
message "WAIT". After the message dis-
appears, the procedure of entering the
code may be started again.
Code Card
This document certifies ownership of the
car radio. The Code Card contains infor-
mation concerning the car radio model, its
serial number and the password.
WARNING Guard the Code Card with
care so you can provide the competent
authorities with the relevant data if the car
radio is stolen.
23