Setting Date And Time - ION SnapCam Quick Start Manual

There is only one direction to insert the MicroSD Card into the slot. Do
not force the MicroSD Card into the slot as this may damage both the
scanner and the MicroSD Card.
The MicroSD Card must be formatted before first time use.
4.3 Setting Date & Time
When the SnapCam is used for the first time, or it has been restored to
default settings, it is necessary to set the SnapCam's clock to ensure the
captured photo and video files are saved with correct date and time
information.
To set-up the SnapCam's clock :
1. Insert a MicroSD Card into the SnapCam.
2. Connect the SnapCam to PC as mass storage device (please
refer to Section 5.7).
3. Open the MicroSD file folder, create a file in any format (eg. txt
file) and name it with the format "set-YYYYMMDD-HHMM", YYYY,
MM, DD, HH, MM represent the year, month and day, hour,
minute of existing time. (eg : set-20150618-1100.txt)
4. Disconnect the SnapCam from the PC, one tap on SnapCam
surface, the SnapCam will scan the file and write it to system
clock.
EN-6