6. Install the bag tab into the notch in the hood assembly
(Figure
5).
Note: Do this for all the bags.
Note: The bags should rest on the bagger frame.
Figure 5
1. Hood assembly
2. Notch
3. Bag tab
7. Lower the bagger hood over the bags
Figure 6
1. Hood
2. Bagger latch
8. Position the bagger latch under the latch hook
7).
9. Push down on bagger latch until it locks into place
(Figure
7).
4. Bag
5. Bagger frame
(Figure
6).
3. Latch hook
4. Bag
(Figure
1. Bagger latch
6
Figure 7
2. Latch hook