Advertisement
Quick Links
Advertisement
Related Manuals for Waterstone 5000
Summary of Contents for Waterstone 5000
- Page 1 HOT TANK INSTALLATION AND OPERATING INSTRUCTIONS Model #: 5000...
-
Page 2: Before You Begin Your Installation
Waterstone can not and will not be held liable for damages created by a use for which our products were not designed. Waterstone will only recommend the installation of a water chiller in the vented side (in place of a hot tank) with one of our Hot or Hot & Cold Filtration faucet models. - Page 3 HOW A VENTED FAUCET WORKS NEVER! Water from the blue supply tube (A) ows CONNECT A #5000 HOT TANK TO A FAUCET through the faucet base to the ON/OFF AS SHOWN valve (B). Water is then diverted into the red tube (C) and into the Hot Tank (D) and pressure is regulated through the built-in PRV valve.
- Page 4 DO NOT plug in unit until tank is full Check that installation area is dry and no of water. Turn on faucet hot water until water has spilled. Connect plug to the water flows freely from faucet. This means power socket. The Hot Tank’s display panel Connect 1/4”...
-
Page 5: Safety Instructions
This will help avoid possible property damage or personal injury. If a leak is found, replace any connectors and loose or split tubes. Place the unit in a drain pan or use a Waterstone AS-414 Safety Valve-Leak Detector... -
Page 6: Troubleshooting
• 1/4” NPTF inlet and outlet connections. • Protective metal casing. • Dimensions: 7-7/8”L x 8-7/8”W x 12-1/4”H. • Works with any Waterstone Hot Only or Hot & Cold Filtration Faucet. 41180 Raintree Court • Murrieta, CA 92562 • Manufactured by Aqualogic.