Bluetooth Reconnection - Mpow BH261 User Manual

2. Short press the Multifunction button on BH261. And it will enter
pairing mode with the BT2 indicator light flashing blue quickly. The
first connected device won't be affected, and can function normally.
3. Narrow the distance between BH261 and the second device, such as
Bluetooth headphone, speaker etc. (within 1 m). It may take 5-30
seconds to complete the connection to the second device. And the
corresponding indicator lights for different codecs can be shown as
follows:
A: The BT1 and BT2 indicator lights will stay blue (SBC transmission:
if either headphone doesn't support APTX).
B: The BT1 and BT2 indicator lights will stay green (APTX transmission:
both headphones support APTX).

5. Bluetooth Reconnection

1. Reboot BH261, and it will enter reconnection state: reconnect to last
two paired devices by priority.
2 . If BH261 fails to reconnect in 22 seconds, it will enter pairing mode
automatically; you can also short press the Multifunction button to
enter pairing mode at once.
6.Clear Pairing List
1. In power-off state, long press the Multifunction button for 6 s until 3
indicator lights stay on simultaneously for 1 s to clear pairing list
(Note: After you hold the Multifunction button for 3 s, the Power
07