Table of Contents
Advertisement
Quick Links
Best.nr: 20101783
HDMI 3X3 4K Video Wall Controller with USB
TYPE-C /VGA / DP/ HDMI Inputs
Operating Instructions
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please
read these instructions carefully before connecting, operating or adjusting this product.
Please keep this manual for future reference.
1
Advertisement
Table of Contents
Related Manuals for Foxun SX-VW02
Summary of Contents for Foxun SX-VW02
- Page 1 Best.nr: 20101783 HDMI 3X3 4K Video Wall Controller with USB TYPE-C /VGA / DP/ HDMI Inputs Operating Instructions Dear Customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
-
Page 2: Table Of Contents
Directory 1. FEATURES............................. 4 2. NOTICE............................4 3. SPECIFICATIONS..........................4 4. PACKING CONTENTS........................5 5. PANEL DESCRIPTIONS....................... 5 6. CONNECTING AND OPERATING....................6 7. CONTROL INSTRUCTION......................8 7.1 Remote Control..........................8 7.2 Video Setting By Panel Control....................9 7.2.1 Video Switching......................... 9 7.2.2 Video Wall Setting......................10 7.2.3 Mirror.......................... - Page 3 MAINTENANCE..........................31 PRODUCT SERVICE........................32...
-
Page 4: Features
1. FEATURES Support USB TYPE-C /VGA /DP / HDMI input. Support 4K 3x3 video wall, cascading to create 3x4,4x5, 5X6,and max 10x10 video wall. Support output image 180° rotation. Support highest resolution up to 4K30HZ 4:4:4 for all inputs. ... -
Page 5: Packing Contents
4. PACKING CONTENTS 1) Main Unit: HDMI 3X3 4K Video Wall Controller 2) 1x Power supply 24V2A 3) 6x Screws, 2x detachable mounting ears 4) 1x CD(Including User manual, RS232 command list) 1x Remote controller 1x USB cable( for firmware upgrade) 5. -
Page 6: Connecting And Operating
DC24V2A input Type-C input port VGA input port Audio input port for VGA source DP input port HDMI input port HDMI loop output S/PDIF output port Analog Stereo output port RS232 port TCP/IP port HDMI output1 to HDMI output9 ports 6. - Page 7 6x4 Video Wall Displaying...
-
Page 8: Control Instruction
Distribute A Single Source to 9 Displays 7. CONTROL INSTRUCTION 7.1 Remote Control 1. Power on/off 2. Mute 3. Source switching 4. Switch signal source of IN1 (TYPE C) 5. Switch signal source of IN2 (VGA) 6. Switch signal source of IN4 (HDMI) 7. -
Page 9: Video Setting By Panel Control
7.2 Video Setting By Panel Control Press the "Source" button to select the input from Type-C→VGA→DP→HDMI. Note: 1.The video switching OSD interface only shows nine output channels and the current input signal channels, and it can only switch one input source to all output channels when the input and output are both connected to the device. -
Page 10: Video Wall Setting
Video switching interface 7.2.2 Video Wall Setting Press the "Left/Menu" on the panel to enter the "Video Wall" menu, "Preset" : Including 17 kinds of common scenes such as 2x2, 1x4,4x1,4x2 and so on, The selected one has a "@" to mark. "Set Up": Press the "Right/Enter"... -
Page 11: Mirror
Preset video wall mode Video wall set up 7.2.3 Mirror Press the "Left/Menu" on the panel to enter the "Mirror" menu, Press the "Up" or "Down" on the panel to select, then press "Enter" to confirm, The selected one has a "@" to mark. "Normal"... -
Page 12: Rotate
Mirror interface 7.2.4 Rotate Press the "Left/Menu" on the panel to enter the "Rotate" menu,The selected one has a "@" to mark. Each output image support 180 degree rotation, select "Yes" or "No" to set up, Rotate interface... -
Page 13: Edge
7.2.5 Edge Press the "Left/Menu" on the panel to enter the "Edge Set" menu, Press the "Up" or "Down" on the panel to select, then press "Enter" to confirm, The selected one has a "@" to mark. "X" represents the margin setting between the horizontal displays, each image is divided into 302 units. -
Page 14: Format
7.2.6 Format Press the "Left/Menu" on the panel to enter the "Format" menu, Format including 4K30； 1080P@60； 720P@60； 2560x1440； 1920x1200； 1366x768 and Auto for each output or all outputs to choose by pressing the "Up" or "Down" button, press "Enter" to confirm the selection, Default is Auto format, The selected one has a "@"... -
Page 15: Audio Setting By Panel Control
Default is "4k30hz" EDID interface 7.3 Audio Setting By Panel Control 7.3.1 Audio input setting Press the "Left/Menu" on the panel to enter the "Audio" menu, Press the "Up" or "Down" on the panel to select, press the "Enter" to confirm the selection, the selected one has a "@"... -
Page 16: System Setting By Panel Control
selection, the selected one has a "@" to mark. For each output or all outputs, there are "Mute" and "Delay" to choose, The default settings is Unmute and Delay 30ms. Audio output setting interface 7.4 System Setting By Panel Control 7.4.1 Baud rate Press the "Left/Menu"... -
Page 17: Tcp/Ip Setting
7.4.2 TCP/IP setting Press the "Left/Menu" on the panel to enter the "TCP/IP" menu, Press the "Up" or "Down" on the panel to select, then press the "Enter " to confirm, The selected one has a "@" to mark. It contains set up for " DHCP ON/OFF "; "IP Address"; Mask"; "GW"; "DNS", Eg: IP address setting: 1. -
Page 18: Reboot
IP address Mask address Gateway address DNS Interface 7.4.3 Reboot Press the "Left/Menu" on the panel to enter the "Reboot" menu,... -
Page 19: Factory Reset
Press the "Up" or "Down" on the panel to select "Yes" or "No" , then press the "Enter " to confirm, the selected one has a "@" to mark. Reboot interface 7.4.4 Factory reset Press the "Left/Menu" on the panel to enter the "Factory" menu, Press the "Up"... -
Page 20: Web Control
System information IP information 7.5. Web Control The host computer such as PC is connected to the control device through the TCP/IP network port. The control mode is divided into two types: connect with a computer without network for single device control or connected to the LAN to realize multi-machine control simultaneously. - Page 21 Connecting to LAN to realize multi-user remote control devices (such as mobile phone, other PC) in Ethernet environment, it is necessary to ensure that the IP segment of the host is consistent with that of the connected LAN, it also need to open the DHCP and enter the related IP address to control.
-
Page 22: Interface Introduction
7.5.1 Interface introduction Status display instructions: (1) Click the navigation bar above, then enter the corresponding operation interface. (2) Do not click continuously; Click again after the setting is successful. If the setting is invalid, please click the button again. Browser compatibility (1) Use the browser such as Google, firefox, apple with the latest browser version for better compatibility, The other browsers may result in incompatible problems. -
Page 23: Video Wall Setting
Operating instructions Take the default IP address login as an example: (1) IP configuration: IP configuration is required, whether using single device control or LAN multi-device control. (2) After configuration, pls enter the default IP address into the browser, enter the web end login interface, enter account number: admin, password: admin click on the "Log in"... - Page 24 Eg1：Select DP port as input source to make a 3x3 video wall by 1pcs device. (1) In the Output section, select both the "Horizon" and "Vertical" as number 3, and the "Equipment Cascade " as number 1(There is only one device. The cascade position must be 1, otherwise the setting is invalid).
-
Page 25: Mirror
7.5.3 Mirror Interface introduction: Click the "Mirror" in the navigation bar on the left. The interface has only one section to adjust the Horizontal /Vertical/Both Horizontal and Vertical/ Default. Note: You can only choose one option at each time. Operating instructions Click on the corresponding button to send instructions. -
Page 26: Edge
7.5.5 Edge Interface introduction: The default edge of booth horizontal and vertical display screen is 3.5mm frame size, each image is divided into 302 units. Operating instructions Click on the "+/-" button on both Horizontal and Vertical to adjust. 7.5.6 Format Interface introduction: The interface is used to adjust the output format, the left output section including HDMI Output1 to HDMI Output9 and ALL (stands for all HDMI outputs), the right... -
Page 27: Edid
7.5.7 EDID Interface introduction: The interface is to set up the EDID for each input port or all the input at once. INPUT Section: the back content of the ">>" indicates the input source, and the front content of the ">>" indicates the current EDID information. It support set up the EDID separately for each input or select all input as the same EDID . -
Page 28: Audio Input Setting
Operating instructions Click on the "-/+" button to adjust delay time; options from 0 to 250, per unit is 10ms; Click on the button to choose mute or unmute. 7.5.9 Audio input setting Interface introduction: It shows PCM2.0 and 5.1 to choose for HDMI Input, Default is PCM2.0 setting. Operating instructions Click on the "2.0/5.1"... -
Page 29: Reset
7.5.11 Reset Interface introduction: The interface is used to restart the device and restore factory settings. Operating instructions Click on each function button to achieve its function(as shown in the figure above), the bottom of the selection is blue. 7.5.12 Password Interface description: It use to change the login password. -
Page 30: Firmware Update
Instructions: 1. All instructions begin with "#". Instruction header c% : d---operation parameter, I---operation lock, 2. "_" means underline, indispensable. Primary parameter d% : 0---all outputs, 1-x---indicatesoutputs (1-9), secondary parameters are the same as the first. 3. A space should be added between the instruction header, first-level parameters and attribute parameters. -
Page 31: Gui Update
9.2 GUI Update Open the software UART_ISP.exe on PC, select the correct port and baud rate 115200, enter F0_01 (_ represents space) in the port, then select the program (xxxx.bin) in the path, and click update to complete the upgrade. Note: pls reboot the device after GUI Update. - Page 32 PRODUCT SERVICE 1) Damage requiring service: The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged; (b) Objects or liquids have gotten into the unit; (c) The unit has been exposed to rain; (d) The unit does not operate normally or exhibits a marked change in performance;...
- Page 33 failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage that is attributable to acts of God. 2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY COVERAGE".
Need help?
Do you have a question about the SX-VW02 and is the answer not in the manual?
Questions and answers