Harris UNITY XG-100P Operation Manual page 103

PROGRAM M I NG
3. Additional settings can be
found by scrolling down.
CAUTION: Only authorized
users should attempt channel
editing.
If the active mission plan has
been programmed to allow
channel editing by a properly
trained operator, you will be able
to use the steps that follow.
4. Use to select EDIT
CHAN.
Password protection is
automatically enabled by default
when the mission plan is
programmed to allow channel
editing.
5. Enter the password
programmed into the plan.
NOTE: Password remains
active until power cycle.
6. Use to select OK.
XG-100
5
103