Advertisement
4. Setup
Plug the receiver into the USB port on your PC.The system will
automatically search for the new hardware and complete the
setup.
5. Functions
Laser pointer
Page up/down
Wireless mouse
Powerpoint display and On/Off control
Clock
Self-determined timing alarm
Fixed timing alarm
Chronograph
6. Keys
Key
Screen On / Off
Out of setting mode
Out of setting mode
- 3 -
7. Settings
7.1 Alarm setting
1. Press
for 3 seconds,
the
hour
is flashing, push
push
left or right to go to the
down to change the
minute
, press
enter
the clock setting.
2. It will remind the user by vibrating when it reaches the time set.
Press R to stop, otherwise it will keep vibrating for 30 seconds.
3. If you don't want to set the alarm, when
twice to enter the clock setting.
7.2 Clock setting
1. When entering the clock setting, the time display is flashing,
press
, the
hour
is flashing, push
change the
hour
, push
push
up or down to change the
save
the setting and exit.
2. If you don't want to set the time, when time display is flashing,
press
twice to exit the clock setting.
7.3 Fixed timing alarm
1. Press
for 3 seconds,
on the LCD screen. One of the numbers of
press
to confirm if you want to choose it, and it will move to
the next number and start flashing, press
to the right
to move to the next number.
2. It will exit automatically after all of the five settings are done.
Note:
corresponds to timings of 3, 5, 10, 20 and 30 minutes
respectively. (e.g. If the user set No. 1, 3, 5 at 11:00, then it will
remind the user at 11:03, 11:10 and 11: 30).
will be flashing. Press
up or down to change the
hour
minute
setting, push
to save the setting and
is flashing, press
up or down to
left or right to go to the
minute
minute
, press
and
will display
is flashing,
to confirm or push
- 4 -
,
,
up or
setting,
to
Advertisement
