Advertisement
Inserting an Add-on Board
There are two PCI expansion slots in this computer. One slot contains the
preinstalled modem card. The second slot is open for installation of an add-on
board that supports Windows Me™ and the PCI revision 2.1 specification.
✍
Your VAIO Slimtop™ LCD Computer cannot accommodate PCI add-on boards over 6.6
inches in length.
To insert an add-on board
Make sure you observe the proper safety precautions when you add boards to
your Sony computer. See "Notes on Use" in the VAIO Slimtop™ LCD
Computer User Guide.
1
Shut down your computer and turn off all peripheral devices, such as your
printer.
2
Unplug your computer and any peripheral devices.
3
Remove the cover as described in "Removing the Cover" .
4
Locate the available expansion slot. Remove the screw, and then remove the
slot cover.
Removing the slot cover (PCV-LX810/PCV-LX910)
Inserting an Add-on Board
3
Advertisement
