MPEG1/2, MPG, MPEG4(DivX, Xvid), etc. DVD JUKE BOX Function The LX351HD/SATA supports ISO file and IFO file, you can store DVD titles into an LX351HD/SATA and playback those files just like a DVD Player. You can store various DVD titles into an LX351HD/SATA and manage them with ease.
Page 4
DTS decoder or Receiver. And, as LX351HD/SATA supports 2CH down mix, users who has 2CH speaker can also enjoy multi channel audio track. High Quality DVI Connector The LX351HD/SATA has high quality digital signal DVI port. You can enjoy high quality display without any display distortion. Streaming through Wired/Wireless Network...
Page 5
• DivX or XviD file with GMC or QPEL option can not be supported. • The LX351HD/SATA supports most of ‘AVI’ files, but may not be support some ‘AVI’ files with unique codec.
Page 6
※If you want to change TV out mode, you can use TV OUT button on the remote control or TV OUT button on the front side of LX351HD/SATA set. ※LED light of the front side of LX351HD/SATA moves to corresponding position when you press TV OUT button with 2~3sec time interval.
Page 7
How to handle and other precautions • Make sure that you have to use the AC adapter supplied together with LX351HD/SATA. If not, it may cause unexpected problem like breakdown, burn, etc. • In case that LX351HD/SATA is used or left in a completely covered and high temperature places for long time, it may cause unexpected problem.
Page 8
Name of each point – Front Button & LED of front side ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Function Function SETUP BUTTON OK BUTTON ○...
Page 9
Name of each point – Rear Side ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Function Function External IR receiver Connector DC FAN ○ ○ DVI Out connector Digital Sound Coaxial Connector ○ ○ Component Video Connector Wired LAN Port(RJ-45) ○...
After copying files, disconnect LX351HD/SATA from your PC. Connect LX351HD/SATA to your TV and/or audio system. Turn on the LX351HD/SATA, and change setup at SETUP menu. If you changed your network set-up, please turn off and on again. Now, you are ready to enjoy LX351HD/SATA.
Page 11
HDD Installation 1. Release clamp screws of the lower . After separate pulling the upper case as you can see in the picture case, connect HDD with POWER cable and IDE cable or SATA cable. 3. Insert to take HDD in each part with Recover case cover of the picture.
Page 12
4. Check whether LX351HD/SATA is properly recognized as USB mass storage from “My Computer” on Windows. For Windows 98SE Users 1. Before connecting LX351HD/SATA to your PC, you need to install Driver for Windows 98SE to your PC. You may download the Driver for Windows 98SE from our website(www.globalzio.com) 2.
Page 13
•When you make a folder in the HDD of LX351HD/SATA, it is recommended to name your folders such as ‘MOVIE’, ‘MUSIC’, ‘PHOTO’. - ‘MOVIE’ folder responds to ‘MOVIE’ button of remote controller and ‘MOVIE’ icon of main menu. - ‘MUSIC’ folder responds to ‘MUSIC’ button of remote controller and ‘MUSIC’ icon of main menu.
Page 14
When you connect to HDTVs or other high quality displaying devices, please follow the steps as picture below. • For your safety, turn off the LX351HD/SATA and TV and/or Audio System, before you connect cables • DVI cable is not included with LX351HD/SATA Connecting 5.1CH Audio System...
Page 15
Connecting Network To connect LX351HD/SATA to a network, some equipments are required. To stream movie files from your PC, UTP Lan cable must be connected as below picture and the folders or files must be shared on your PC.
Please use CROSS LAN CABLE, if you are directly connecting to a PC. • If you are using Wireless Lan function, please attached the 5dBi antenna to the back of the LX351HD/SATA. • Wireless signal range may vary depending on your network system. Please make sure that the range and speed of your router or access point are good enough to transfer the data.
Page 17
POINT TO POINT REPEAT/SHUFFLE ODD EJECT ZOOM/SCROLL COLOR SETTING SYNC SUBTITLE SUBTITLE DVD TITLE/MENU DVD ANGLE DEBBING AUDIO AUDIO OUT SELECT Booting Message & Main Menu If power on LX351HD/SATA, it is booted up like below picture. - 18 -...
Page 18
TV Out mode is originally set as PAL/Composite. If no-display on TV screen after booting up, try changing TV Out mode by pressing TV OUT button of remote controller or on the front side of LX351HD/SATA set with 2~3seconds time interval. . Screen of Main Menu Main Menu screen is displayed like below picture after completing booting up.
Otherwise, you can not click or select it. NETWORK icon In case that LX351HD/SATA is connected to network properly through Wired or Wireless LAN, this icon is activated and can be selected. Otherwise, you can not select it.
Page 20
2. Extract the compressed firmware file and copy the extracted file to LX351HD/SATA. Other sources such as USB memory or network connection can be used to update firmware. 3. Turn the LX351HD/SATA on and open “SETUP’. 4. Go into “ETC” tab and select “Firmware update”...
Specifications High Definition Media player EUREKA LX351HD/SATA File Playback Format HD file format (tp), Window Media 9, Window Media 9 HD Video DivX 3.11, DivX4, DivX5, DivX HD, Xvid, MPEG1, MPEG2(IFO,VOB,ISO) Audio MP3, Ogg Vorbis, WMA, AC3, DTS Picture JPG, JPEG, BMP, PNG Subtitle SMI, .SUB, .SRT...
Page 22
FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER ’ S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
ZIO Limited Warranty Statement Thank you for purchasing a ZIO product. All ZIO products come with a one-year limited warranty against defects from the original date of purchase from an authorized dealer. IMITED ARRANTY ONDITIONS ZIO L IMITED WARRANTY IS PROVIDED TO THE ORIGINAL OWNER ONLY AND IS NOT TRANSFERABLE TO ANY THIRD PARTY .
Need help?
Do you have a question about the LX351HD/SATA and is the answer not in the manual?
Questions and answers