Download Print this page

Honeywell 8620 Quick Start Manual

Ring scanner for dolphin 70e/75e wearable solution


Quick Links

8620 Ring Scanner
For Dolphin 70e/75e Wearable Solution
Quick Start Guide
Aller à
Vai a
Gehe zu
Ir a
Para Português, acesse
Перейти на русскоязычный сайт
Pro češtinu jdi na
Pre slovenčinu choď na
Türkçe için lütfen
Idź na stronę :
.‫ﻟﻠﻐﺔ ﺍﻟﻌﺮﺑﻴﺔ‬
para español.
pour le français.
per l'italiano.
für Deutsch.
sayfasını ziyaret ediniz.
po quick start w języku polskim.
‫ﺍﻧﺘﻘﻞ ﺇﻟﻰ‬
8620-ENUS-QS Rev B



Related Manuals for Honeywell 8620

Summary of Contents for Honeywell 8620

  • Page 1 8620 Ring Scanner For Dolphin 70e/75e Wearable Solution Quick Start Guide Aller à pour le français. Vai a per l'italiano. Gehe zu für Deutsch. Ir a para español. Para Português, acesse Перейти на русскоязычный сайт
  • Page 2 Wearable Ring Scanner Scan Window Trigger Ring Strap Connector (connect to sled) Optional C-Ring to replace Ring Strap. Available in two sizes: Small and large.
  • Page 3 Trigger Rotation Scanner head can be rotated 180° Right Hand Left Hand Connect Scanner to Arm Mount Sled Slide the ring scanner cable connector into the bottom of the sled until the connector ring clicks shut.
  • Page 4 Attach Ring to Finger 1. Remove shipping film off the scanner window. 2. Slide finger into loosened ring strap. 3. Pull ring strap to secure ring to finger. Note: If using the C-ring simply slide on to finger. Shipping film The ring cable should not cross under the hand.
  • Page 5: How To Scan A Bar Code

    How to Scan a Bar Code Note: For WEH6.5 and WE8H, you must have a scanning application open on your terminal for the ring scanner to be able to scan. See the Wearable Solution User’s Guide for your terminal on our website at for more information.
  • Page 6 Wrist Position When Scanning Incorrect Incorrect Correct...
  • Page 7 Remove Ring Strap/C-Ring 1. Turn the scanner 90°. 2. Press latch down. 3. Remove the ring strap or c-ring.
  • Page 8 Replace Ring Strap/C-Ring 1. Connect ring latch with trigger catch. 2. Press together until a click occurs. 3. Turn 90°. 4. Ready to scan.
  • Page 9 Remove Trigger 1. Remove ring strap or c-ring. 2. Unscrew the 4 screws. 3. Remove trigger.
  • Page 10 Replace Trigger 1. Place trigger on the scanner. 2. Screw in the 4 screws to secure the trigger. 3. Snap on ring strap or c-ring.
  • Page 12: Technical Assistance

    For patent information, please refer to Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.