Table of Contents
Advertisement
82-N8863-1EN.book Page 39 Monday, April 24, 2006 12:19 PM
Data Settings
Setting Com port speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC, or at which it
sends and receives over-the-air text messages.
→
1.
Menu
Settings
Select
Com Port Speed
.
2.
Select the speed. The options are:
115.2 kbps
230.4 kbps
(default),
Note:
There may be a higher charge for
making calls using high-speed data in areas
where 1X service is available. Check with your
service provider for details.
Setting the phone to receive data
or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode.
To receive data or faxes, you must connect the
phone to a laptop or PC and switch the phone
from voice mode to data/fax mode.
Note:
To purchase a cable, call 800-349-4188
(U.S.A. only), 858-882-1410, or visit
www.kyocera-wireless.com/store
1.
Connect the phone to the laptop or PC.
2.
Set the Com speed.
User Guide for the Kyocera K322 Phone
3.
4.
→
→
Accessories
19.2 kbps
,
Other
, and
.
Connecting to a TTY/TDD device
You can connect the phone to a TTY device for the
hearing impaired.
using the phone with a TTY device.
1.
2.
3.
4.
5.
.
→
→
Menu
Settings
Network
Select
Data/Fax Calls
.
Press
to select an option:
Voice only
–
allows only voice calls.
Fax
next call
Data
next call
–
,
or
,
phone to fax mode or data mode for the
next incoming call or the next 10 minutes.
Fax
until off
Data
until off
–
,
or
,
phone into fax mode or data mode until
the phone is turned off.
Note:
Enable TTY only when
Connect the TTY device to the phone.
Enter
your keypad.
TTY
Press
to select the
option.
Information
Close the
window by pressing
OK
to select
.
TTY On
Highlight
and press
→
sets the
forces the
from
.
39
Advertisement
Table of Contents
