Connecting To Dts Receiver/Decoder; Connecting To Both Analog And Digital Audio - VocoPro DVX-580G Manual

Getting Started
FL FR SUB
SL SR CENTER
Connecting to a DTS Receiver/Decoder
Using either an RCA-ended COAXIAL cable suited for digital audio use or an OPTICAL cable,connect one end to the appropriate jack on the DVX-580G (Coaxial or
Optical) and the other end to the appropriate jack on the DTS receiver (Coaxial or Optical). If you have both coaxial and optical inputs on your DTS decoder/receiver,
it is recommended to use an optical connection as those cables eliminate the possibility of EMI (electromagnetic interference). If your DTS receiver does not have a
built-in DTS decoder, and has 5.1 channel RCA inputs, you can use the 5.1 channel output jacks on the DVX-580G. Either method will provide for DTS decoding.
FL FR SUB
SL SR CENTER
Connecting both Analog and Digital Audio
To do this you will need a Dolby Digital DTS/AC-3 receiver with analog audio inputs.Use optical for video and digital audio and L/R RCA audio for Karaoke features.
Y Cb Cr VIDEO
L R COAXIAL S-VIDEO OPTICAL
-OR-
Y Cb Cr VIDEO
L R COAXIAL S-VIDEO OPTICAL
and
DTS DECODER/RECEIVER
DOLBY DTS/AC-3 RECEIVER
14