JVC LT-39HW45U User Manual page 8

Chapter 2
Remote control functions
Most of your television's functions are available via the menus that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to configure all the general settings.
Standby / quit standby.
To enter channel numbers; to enter a letter, a
Alphanumeric
buttons
digit or a symbol in some functions.
ECO To select desired power saving mode.
SOURCE To select connected devices.
V+/- To control the volume.
To switch the sound off and back on again.
INFO To display programme information, if available.
P+/- To change channels.
or To go directly to the Smart TV menu or the
Yahoo homepage, depending on the model of
your TV.
Smart TV To bring up the Smart TV menu.
@ To go directly to the homepage of your
browser or the Orange homepage, depending
on the model of your TV.
MENU To access the main menu; to return to the
previous menu; to access or exit the virtual
keyboard in Opera browser function.
OK To confirm an entry or selection; to freeze/
unfreeze the picture in digital TV mode.
To navigate through the menus; to select menu
options; to switch to the previous or next photo,
song or video in USB function.
To navigate through the
and change values. ► can also be used to
/*ZOOM+/-
open the corresponding submenu.
* To select the picture format.
Note: You are recommended to use the full
screen mode. Do not use the display mode with
black bars on both sides of the picture (such as
4:3) for long time; otherwise the TV screen may
be damaged permanently.
Important:
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries when the remote
control is not to be used for a long time. Batteries left in equipment may cause damage through deterioration and corrosive
leakage, invalidating the guarantee.
To protect the environment use local recycling facilities for battery disposal. Dispose of used batteries according to the
instructions.
CAUTION: Risk of explosion if batteries are replaced by an incorrect type.
If the batteries in your remote control are run down you can use the buttons on your TV set. In TV mode, they have
the same functions as the corresponding buttons on the remote control. The OK button on the TV set can be pressed
repeatedly to select the required source. In the menus they have the following functions:
For models with OK button on the set:
PR+ or PR ▲
PR- or PR ▼
+ or VOL ►
VOL+,
- or VOL ◄
VOL-,
MENU or
OK
menus; to set functions
For models without OK button on the set:
▲ PR+ or PR ▲
▼ PR- or PR ▼
►
VOL+,
◄
VOL-,
MENU MENU or
OK
EN 4
To return to the previous channel; to return to
the previous menu in USB function
EXIT To exit the menu structure or Teletext.
OPTION To display the function menu to perform certain
operations; to display the Teletext page in
different modes.
USB To bring up the Media center menu.
TV To access TV mode.
SLEEP To toggle among the sleep timer options.
GUIDE To toggle the Electronic Programme Guide on
or off (only available for digital channels).
FAV To bring up the Channel list selection menu.
LIST To display the channel list.
Colour To select tasks or Teletext pages. The red
buttons button can also be used for MHEG function.
Lang To select a sound type available for selected
analogue TV programme; to select an audio
language available for selected digital TV
programme.
SUBTITLE To select a subtitle language available for
selected digital TV programme.
TEXT To toggle Teletext on or off.
Replay To select the previous photo, music or video.
Next To select the next photo, music or video.
Rewind To start fast reverse.
Forward To start fast forward.
REC Recording button.
Play/ To start or pause playback.
Pause
Stop To stop playback.
+ or VOL ►
- or VOL ◄
Getting started
►
◄ & OK
▲
▼
MENU