Programming For Cable Set-Top Box; Programming For Dvd Player - Vizio VUR6 User Manual

4. Find the programming code for your VCR in the code list in the back of this book and enter it using
the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the VCR and press the POWER button. The VCR will turn off.
Note:
a) If your VCR does not respond, try all the codes for your VCR brand. If the codes do not
work, or your brand is not listed, see "Searching for Component Codes."
b) Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.
1.2.2 1.2.2 Programming for Cable Set 1.2.2 1.2.2 Programming for Cable Set Programming for Cable Set- - - - Top Box Programming for Cable Set
1. Manually turn on the Cable Box.
2. Press the CBL button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your Cable Box in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
5. Point the remote control at the Cable Box and press the POWER button. The Cable Box will turn off.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and
manufacturer.
Note:
a) If your Cable Set-Top Box does not respond, try all the codes for your brand. If the codes
do not work, or your brand is not listed, see "Searching for Component Codes."
b) Sometimes a code listed will only include limited functions. Try other codes that may
include more functionality.

1.2.3 Programming for DVD Player

1.2.3 1.2.3 1.2.3 Programming for DVD Player Programming for DVD Player Programming for DVD Player
1. Manually turn on the DVD Player.
2. Press the DVD button on the remote control.
3. Press and hold the SET button until the LED LIGHT flashes twice.
4. Find the programming code for your DVD player in the code list in the back of this book and enter it
using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is
entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component
and manufacturer.
5. Point the remote control at the DVD Player and press the POWER button. The DVD Player will turn
off.
VIZIO VUR6Universal Remote User Manual
Top Box Top Box Top Box
7
www.VIZIO.com