Table of Contents
Advertisement
Decommissioning
Warning
The terminal strips of the measuring transducer ORT 7 can be live during operation.
This presents the danger of severe injuries due to electric shock.
Always cut off power supply before mounting, removing or connecting wires to the
terminal strips.
Removal
. Cut off power supply.
2. Disconnect all wires and draw the cables through the cable gland.
3. Remove the measuring sensor and the measuring transducer.
Disposal
Dismantle the oil & turbidity detector OR 52-7 and separate the waste materials according to the
material specification. Electronic component parts such as the circuit board must be disposed of
separately. For the disposal of the control unit observe the pertinent legal regulations concerning waste
disposal.
29
Advertisement
Table of Contents
