Mac Filtering - TP-Link TL-WR641G User Manual

Radius Server IP - Enter the IP address of the Radius Server
Radius Port - Enter the port number that the radius service used.
Radius Password - Enter the password for the Radius Server.
Be sure to click the Save button to save your settings on this page.
Note:
The router will reboot automatically after you click save.

4.5.2 MAC Filtering

The Wireless MAC Filtering for wireless networks is set on this page, Figure 4-19:
The Wireless MAC Address Filtering feature allows you to control wireless stations accessing
the router, which depend on the station's MAC addresses.
MAC Address - The wireless station's MAC address that you want to access.
Status - The status of this entry either Enabled or Disabled.
Privilege - Select the privileges for this entry. You may select one of the following Allow /
Deny / 64-bit / 128-bit / 152-bit.
Description - A simple description of the wireless station.
TL-WR641G 108M Wireless Router User Guide
Figure 4-18
Figure 4-19
- 32 -