Advertisement
Quick Links
Advertisement
Summary of Contents for T3 Technology A4262 Wi-Fi6
- Page 1 T3 Technology A4262 Wi-Fi6 Wireless Router Quick Start Guide...
-
Page 2: Product Hardware Description
Product Hardware Description Product Backside Description Short press (1 second) for reset the router Long press (5 seconds or longer) for reset to factory default settings... - Page 3 LED Description: LED Behavior Scenario Dark No Power Steady Red Powering up Blinking Red No network cable connected Blinking Green Network connection in progress Steady Green Function normally and can access the Internet Blinking Blue WPS or Mesh pairing in progress Steady Blue Paring successful...
-
Page 4: Product Manual
Product Manual For Single Router：Connect the provided network cable from the router to your home Broadband Gateway (i.e. cable/DSL modem, PON gateway). Please refer to SINGLE ROUTER SETUP STEPS for network setup. For Mesh Router Set: Master AP is used as the main router, which is to be connected, via provided network cable, to your home Broadband Gateway (i.e. - Page 5 ONE ROUTER SETUP STEPS 01. The Single Router or Master AP in a Master Router Set can be connected according to the diagram above. It is connected to the Internet when the LED light is steady green. If you can, try place the Single Router or Master AP in an open area like on a table or a shelf.
-
Page 7: More Settings
MORE SETTINGS ※ Please refer to the following steps to change the Internet access method: 01 Wireless access terminals (such as mobile phones, PAD, laptops, etc.) or wired access terminals can open the browser to visit http://192.168.0.1, and configure the router device. 02 Password needs to be set for the first time login, click "Next". - Page 8 the Internet, you can select "PPPoE", fill in the broadband account and password, and click "Next". ! Note: If you forget your broadband account password, you can inquire from the broadband operator. ! Note: "Skip" defaults to "DHCP" mode. 04 Set Wi-Fi name and password (you can modify the Wi-Fi name). The device selects “The password is the same as the login password”...
- Page 9 ※ Please refer to the following steps to add a single product customized Mesh network expansion: For duplexes, villas, and large-area residents, you can purchase multiple T3 technology routers of the same model to join the Mesh network to improve WiFi network coverage.
- Page 10 03 Start networking, If you choose wired networking, connect the new single product network port to the Master AP network port. The wired network is successful when the new single product indicator is steady green; If you choose wireless networking, place the new item near the Master AP, press both devices WPS buttons for 1s, then release.
-
Page 11: Frequently Asked Questions
For some cable carriers, they limit the number of in-home device to one. This Q4 How to manage T3 technology router problem may happen if you replace your old network? router with T3 AP. In this case, you need...