Advertisement
ULV COLD FOGGER
1.
After pouring an appropriate amount of water or solution into
the tank, lock the cap of the tank completely.
2.
Turn the air control switch
that the solution control valve
turning clockwise before connecting the power line.
3.
Make the spray nozzle facing the working direction, and turn
the air control switch
4.
After confirming the speed of air ejected from the injection
nozzle does not affect the surroundings, adjust the amount of
water or solution by opening the solution control valve
c
f
Operation
a
counter-clockwise, then ensure
is completely locked by
b
c
clockwise to adjust the speed of air.
Stop operation
1.
First, make sure to completely close the solution control
valve
e
so that water or solution is not injected.
2.
Turn the air control switch
motor.
3.
Remove the power cord.
4.
Empty the solution tank and clean it.
5.
Then spray clean water to the hose and nozzle
for washing.
.
d
counter-clockwise and stop the
f
a
b
c
d
Advertisement
Table of Contents
Summary of Contents for EcoloxTech ULV Cold Fogger
- Page 1 ULV COLD FOGGER Operation After pouring an appropriate amount of water or solution into the tank, lock the cap of the tank completely. Turn the air control switch counter-clockwise, then ensure that the solution control valve is completely locked by turning clockwise before connecting the power line.
- Page 2 Use Precautions IN ORDER TO PREVENT ACCIDENTS DURING OPERATION, PLEASE READ THE USER’S GUIDE BEFORE USE. • Please use the electricity equipped with the grounded circuit breaker. • Do not use when the power line is wet. Do not touch the cord with wet hands. •...
Need help?
Do you have a question about the ULV Cold Fogger and is the answer not in the manual?
Questions and answers