Advertisement
Quick Links
Thank you for choosing our ice cream machines. Our ice cream machines have applied
the international advanced refrigeration industry, the famous brand compressors and good
quality refrigeration components. With good looking and reliable performance, our products
measure up the national safety standard of food processing machinery and electric appliance,
and can be used in bars, fast food shops, hotels, schools and cold drink stores. We have
achieved the certificate for ISO 9001:2000(International Standard for Quality Management
System 9001:2000). Some ice cream machines have got CB and CE approval.This model is
commercial ice cream machine, which should be operated by the qualified trained staff or
follow the instructions of trained staff. Please read the operation manual carefully and follow
the instructions strictly then install, adjust and operate the machines.
1.
Major Technical Data
Item
Figure
Model
BQ116Y1
BQJ-10BY1
BQ116PY1
BQJ-10BPY1
BQ816Y1
BQJ-11/2AY1
BQ620Y1
BQJ-10/2CY1
BQ620Y
BQJ-10/2CY
BQ820Y1
BQJ-10/2BY1
BQ820Y
BQJ-10/2BY
BQ633Y1
BQJ-20/2BY1
BQ633PY1
BQJ-20/2BPY1
BQ633Y
BQJ-20/2BY
BQ633PY
BQJ-20/2BPY
BQ833Y1
BQJ-20/2AY1
BQ833PY1
BQJ-20/2APY1
Main
Rating
Refr
Power
kW
R404a
220V/50Hz
1.7
(60Hz)
(R22)
R404a
220V/50Hz
1.7
(60Hz)
(R22)
R22
220V/50Hz
1.7
(60Hz)
(R404a)
R22
220V/50Hz
1.7
(60Hz)
(R404a)
R404a/
220V/50Hz
1.8
R134a
(60Hz)
(R22)
R22
220V/50Hz
1.7
(60Hz)
(R404a)
R404a/
220V/50Hz
1.8
R134a
(60Hz)
(R22)
R22
220V/50Hz
2.6
(60Hz)
(R404a)
R22
220V/50Hz
2.6
(60Hz)
(R404a)
R404a/
220V/50Hz
2.7
R134a
(60Hz)
(R22)
R404a/
220V/50Hz
2.7
R134a
(60Hz)
(R22)
R22
220V/50Hz
2.6
(60Hz)
(R404a)
R22
220V/50Hz
2.6
(60Hz)
(R404a)
Capacity
Cups per
Kg/h
hour
10-14kg
160-230
(14-20L)
10-14kg
160-230
(14-20L)
12~18 kg
200~300
（17~28L）
12~18 kg
200~300
（17~28L）
12~18 kg
200~300
（17~28L）
12~18 kg
200~300
（17~28L）
12~18 kg
200~300
（17~28L）
20~25 kg
330~420
（28~36L）
20~25 kg
330~420
（28~36L）
20~25 kg
330~420
（28~36L）
20~25 kg
330~420
（28~36L）
20~25 kg
330~420
（28~36L）
20~25 kg
330~420
（28~36L）
1
Net
Measurement
Weight
mm
㎏
105
518×745×756
110
518×745×756
116
518×745×770
143
518×760×1420
158
518×760×1420
145
518×745×1420
160
518×745×1420
158
518×760×1420
168
518×760×1420
173
518×760×1420
183
518×760×1420
160
518×745×1420
170
518×745×1420
Advertisement
Summary of Contents for Starfood BQ116Y1
- Page 1 Major Technical Data Main Rating Capacity Cups per Measurement Item Figure Weight Refr Power Kg/h hour ㎏ Model R404a 10-14kg 220V/50Hz BQ116Y1 BQJ-10BY1 160-230 518×745×756 (60Hz) (R22) (14-20L) R404a 10-14kg 220V/50Hz BQ116PY1 BQJ-10BPY1 160-230 518×745×756 (60Hz) (R22) (14-20L) 12~18 kg...
- Page 2 Main Rating Capacity Cups per Measurement Item Figure Weight Refr Power Kg/h hour ㎏ Model R404a/ 20~25 kg 220V/50Hz BQ833Y BQJ-20/2AY 330~420 518×745×1420 R134a (60Hz) （28~36L） (R22) R404a/ 20~25 kg 220V/50Hz BQ833PY BQJ-20/2APY 330~420 518×745×1420 R134a (60Hz) （28~36L） (R22) R404a 45~50 kg 3-380V/50Hz BQ747Y...
- Page 3 2. Schematic Diagram For the Basic Structure: (Fig.1) 1) Main Body 2) Feed Hopper Lid 3) Top Cover 4) Bulk Inner Tube 5) Bulk Outer Tube 6) Automatic Controlling Assembly 7) Plug of the Throat Block 8) Handle 9) O-ring Gasket of the Plug 10) Bridge Gasket 11) Horizontal Bar 12) Bolt of the Throat Block...
- Page 4 3. Control Panel(Fig.2) Control Panel Indicator Fig.2 Notice Using Environment Environmental Temperature：10℃~38℃。 ● ● Relative Humidity：55％~85％。 Power ● Please do install the ground wire according to the national electric safety standard. The section area of the ground wire can not be smaller than 1mm². ●...
- Page 5 truckle brake after placing the machine at using place. (For some models only) Operation To ensure safety, machine must be operated or supervised by qualified staffs, who ● possess enough safety common sense on electric appliance and mechanism as well as know special requirements of the machine fully.
- Page 6 ● If the machine is not used for a long time, please cut off the electric supply and let out the water in water inlet soft tube. ● Keep the machine clean at any time. Clean the alterative waste ingredients to avoid accessory rust.
- Page 7 Special Advice: It would be better if our ice cream powder is used. (There are tens of flavor to meet your choice, such as milk, chocolate, vanilla, mango, etc.) 6. Cleaning Cleaning before Production a. By hand in counterclockwise direction unscrew throat screws(or by spanner unscrew four throat bolts.) b.
- Page 8 Pour the prepared ice cream slurry into two hoppers. The liquid surface should not be higher than the top hole of the outer tube. Screw the outer tube making the top holes for the inner tube and outer tube coaxial. Then the bottom holes are completely open. The ice cream slurry can go to the refrigeration tank through the bottom holes.
- Page 9 c. If you want to change the point, please change it after the machine runs for one minute. Otherwise the effect of hardness adjustment is affected. 4) Keeping fresh function of ice cream machine a. When the machine is in the state of AUTO, the machine precools the material in the hoppers automatically, making the material at a certain low temperature and fresh.
- Page 10 9. Electrical Drawing Please refer to the electrical drawing which is stick to the cover of the electrical case 10. Easily Worn-out Parts List 633*\620*\833*\ Model 116* 820*\836*\818* 368* 8530* 747* 112* Size Quan \816* O Shape Gasket φ19×3.9 O Shape Gasket φ26×5.2 Bridge Gasket Quadrate Gasket...
-
Page 11: Troubleshooting
11. Trouble Shooting Trouble Reasons Analysis Disposal Refrigeration A. The A. The starter or *A.B. Change the Failure compressor capacitor defective parts. does not run. malfunctions. Increase the B. The compressor size of cross section or controlling board area of the cable is damaged. - Page 12 Trouble Reasons Analysis Disposal installed. B. Oil leakage The Y-gasket or Change the in the bearing O-ring for the defective gaskets. pedestal or bearing pedestal is material defective. leakage. No ice-cream A. Not enough A. The bottom hole A. Remove the bulk discharge.
- Page 13 Trouble Reasons Analysis Disposal D. Indicator malfuctions. displays ‘E4--’, C. The voltage of hopper temperature the power supply is sensor too low or too high. malfunctions. D. E. The E. Indicator temperature sensor displays ‘E5--’, is short circuit or refrigeration tank open.
Need help?
Do you have a question about the BQ116Y1 and is the answer not in the manual?
Questions and answers