Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Smart Movt Technology Shaper
- Page 1 Manual Hybrid Smart Watch Model:Shaper...
-
Page 2: Product Sketch
1. Product Sketch... -
Page 3: Bluetooth Connection
2. Operation Manual 2.1 Bluetooth 【1】 Check the status of the Bluetooth a) Press the button of 3H; b) if the 12H light is continuously on for 2 seconds, the watch is connected with the phone; if the 12H light flashes for 2 seconds and 4 times each second, the watch is disconnected with the phone;... -
Page 4: Find My Phone
【2】 When connecting, 12H light (red & green) will flash alternately flash for 3 seconds, shake the watch or press the 3H button will make the 12H light flash once, connection completed. 2.3 UV 【1】 Press the 3H button twice in 0.5 second, 12H light will flash once and the watch begins to detect UV index, then after 5 seconds;... -
Page 5: Remote Shutter
Then 12H light (red) will flash once, the phone will be ringing. 2.5 Remote Shutter 【1】 Click the Remote Shutter of APP; 【2】 12H light (red) will flash once every 5 seconds; 【3】 shake your hand or press any button, the watch will flash once, one picture taken. -
Page 6: Ota Upgrade
2.8 Call Reject when watch alerts for incoming call, shake your hand or press any button of the watch to hang up the phone. Note: function available under connection between phone and watch, APP must be granted permission from the phone. 2.9 Pedometer Set an acts goal in the APP, and you can check your exercise status through the APP. -
Page 7: Replace The Battery
【5】 Check whether the time of watch is accurate, with deviation you need to click Hands Calibration. 2.12 Replace the Battery 【1】 When watch is power off, please replace the battery; (When the watch is of low battery, it will automatically turn off Bluetooth connection) 【2】... - Page 8 if 12H red light flashes for 2 seconds and 4 times each second, it means the watch is of low battery; if 12H light flashes for 2 seconds and twice each second, the power is at normal status. Press & hold the 3H button for 3 seconds, the watch begins to work and 12H light will flash for 2 seconds, Bluetooth is on.
- Page 9 Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Need help?
Do you have a question about the Shaper and is the answer not in the manual?
Questions and answers