Do you have a question about the Quick Scope 11 and is the answer not in the manual?
Questions and answers
Summary of Contents for Sport Scope Quick Scope 11
Page 1
Quick Scope 11’ & 16’ Instructions Dear Customer, We appreciate your business and value your support for our product. At Sport Scope, we strive to provide our customers with quality, easy to use, and affordable end zone camera systems. We are confident that you will feel that we have met all your expectations.
Camera Set Up When you get your camera you will need to change a few settings to make it work properly with your Quick Scope. Turn Off Power Save Power Save turns the camera off after 5 minutes. In the Setup menu 1) Select Setup 2) Select Power Save 3) Select Off...
Set Up Instructions The Quick Scope pole comes in a travel bag. Inside your travel bag’s (1) pocket you will find (2) a wrapped cable, (3) camera lens cover, (4) monitor rain cover. (5) There is also a black waterproof cover for the camera.
Page 4
Remove Sony camera and extended cylinder battery from hard case. Make sure micro SD memory card has been inserted into side slot. (1) First open viewfinder to turn ON camera. Next turn ON extended battery BEFORE connecting to camera. (2) Connect USB cord from camera to extended battery.
Page 5
Now (1) slide a charged monitor battery into the battery plate as shown. Then (2) slide monitor over the monitor swivel mount and tighten the silver knob against the back of the monitor to secure it. To attach the cable, first (1) clip the carabineer attached to the cable to the eye-hole bolt of the Quick Scope pole.
Page 6
Next, slide the (1) camera remote on to the mount as shown. (2) The camera remote controls the zoom in/out, record/standby, and on/off of the camera. The REC light on the remote will be RED when recording and GREEN when in standby.
Page 7
Rain Gear Instructions All rain gear is found in the pocket of the travel bag. (1) Find the black lens hood. (2) This flexible lens hood can be folded over onto itself and the Velcro holds its position as shown. (3) To begin the attachment process, you will first loosen the camera mount knob and (4) slide...
Battery Instructions The Quick Scope has three battery sources that power the monitor and the camera. Extended USB Camera Battery: lasts 5-6 hrs. Internal Camera Battery: lasts 45min-1hr. Monitor Battery: lasts 4-5 hrs. To charge extended USB To charge monitor battery, camera battery, (1) attach (5) attach battery to wall To charge internal camera...
Page 9
Transferring Video to Computer The camera records the video to the micro SD memory card. To transfer the video to your computer for viewing or editing, (1) Tap the micro SD card inward into the camera slot so that it releases and then remove.
Need help?
Do you have a question about the Quick Scope 11 and is the answer not in the manual?
Questions and answers