Advertisement
LMS2, Service Bulletin, Firmware Update
Description of Service Bulletin
This service bulletin relates to the firmware update procedure for LMS2
display modules.
Affected Components
LMS2-LASX015 – Display Module
LMS2-LASX153 – Display Module
Compliance Requirements
None
Action Required
Tools Required
The following tools are required for the memory card update:
Memory Card Update Procedure
The following procedure is required to update the memory cards:
LMS2, Service Bulletin, Firmware Update Procedure
NON CONTROLLED DOCUMENT
1. Small Phillips Head Screwdriver to remove memory card from
display
2. Magnetic digital spirit level
LDOC039 / Rev. 0.3
August 2012 • 1
Advertisement
Table of Contents
Summary of Contents for SIL3 LMS2 Series
- Page 1 LDOC039 / Rev. 0.3 LMS2, Service Bulletin, Firmware Update Procedure Description of Service Bulletin This service bulletin relates to the firmware update procedure for LMS2 display modules. Affected Components LMS2-LASX015 – Display Module LMS2-LASX153 – Display Module Compliance Requirements None Action Required Tools Required The following tools are required for the memory card update:...
- Page 2 5. Locate the files provided for your machine by opening the .zip file provided. a. Delete the contents of the memory card(s). b. Copy the files from the .zip file to the root directory of your memory card. © 2016 SIL3 Pty. Ltd. – All Rights Reserved.
- Page 3 LDOC039 / Rev. 0.3 c. The file layout should look similar to the layout below: 6. Re-install the memory card cover and the screw from the display. 7. Switch on the power to the Machine by turning the key to ACC. 8.
- Page 4 The following procedure can be completed to determine if the fork zero needs to be set: 1. Ensure the standard forks (i.e. A0300, A0301, A0304, etc. are fitted and that the forks are kept horizontally level. 2. Fully retract the boom. © 2016 SIL3 Pty. Ltd. – All Rights Reserved.
- Page 5 3. Select the “Zero Fork Weight” menu item. 4. The weight is now set and the LMS can be restarted. Additional Notes Please visit http://sil3.com.au/lms2 for more information. LMS2, Service Bulletin, Firmware Update Procedure August 2012 • 5 NON CONTROLLED DOCUMENT...
Need help?
Do you have a question about the LMS2 Series and is the answer not in the manual?
Questions and answers