1. Manuals
  2. Brands
  3. Servpro Manuals
  4. Floor Machine
  5. 873
  6. Information & operating instructions

Servpro 873 Information & Operating Instructions

120v
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL 873
EXTRACTOR
120V
INFORMATION
&
OPERATING
INSTRUCTIONS
CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ
ALL SECTIONS OF THIS INSTRUCTION MANUAL
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2. Connect the machine to a properly grounded outlet, only.
3. Keep machine from rain and snow, extremes in temperatures, and store in a heated
location. Use the machine indoors. Do not use outdoors.
4. Use approved chemicals only. NO SOLVENTS.
5. Wear gloves or use rags when removing quick disconnects to prevent burns.
6. Never use water above 130 ºF/54 ºC in the solution tank.
1
3/10 revised 11/11 Form No. 56041943

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 873 and is the answer not in the manual?

Questions and answers

Summary of Contents for Servpro 873

  • Page 1 MODEL 873 EXTRACTOR 120V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.

  • Page 2: Important Safety Instructions

    • Use extra care when cleaning on stairs. • Connect to a properly grounded outlet only. • Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure, or chemical content. FORM NO. 56041943 - SERVPRO 873...

  • Page 3: Cleaning Solutions

    INSPECTION: Carefully unpack and inspect your Model #873 Extractor for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts.

  • Page 4: Switch Plate

    Solution Tank YOUR MACHINE Access Switches Recovery Tank Lid Power Cords Vacuum Hose Connection Recovery Tank Drain 12” Wheel Solution Output Quick Disconnect Castor FORM NO. 56041943 - SERVPRO 873...

  • Page 5: Setup And Operation

    Always use a defoamer in the recovery tank to prevent water or foam from entering the vacuum motor. Always make sure the fl oat cage is clean and the ball can travel freely before turning on the machine. FORM NO. 56041943 - SERVPRO 873...
  • Page 6 FORM NO. 56041943 - SERVPRO 873 revised 11/11...
  • Page 7 Elbow 1554 Mount, pressure reg. FP619 Pre-fi lter bag with cord lock 1555 Clamp, pressure regulator to mount 2194 Label Servpro 873 8.0 X 2. FP652 Pump, complete, 500 psi 4325C Label, Heat Designation Power 26A# FP653 Motor, pump drive...

  • Page 8: Troubleshooting

    137” Pump: 500 PSI, positive displacement, adjustable Heat: 212º F, Maximum Heater: 2000 Watts Weight: 100 lbs. Dimensions: 18W x 38L x 34.5H (inches) SERVPRO INDUSTRIES, INC. 575 AIRPORT BLVD., GALLATIN, TN 37066 615-451-0200 FORM NO. 56041943 - SERVPRO 873...

Table of Contents