Advertisement
Quick Links
How to Install Healthcare TV w/ HC20
Things you will need:
HC20
*********************
IR & Audio connection cable
You will also provide applicable pillow speakers at the bedside and jumper cables at the TV side. You
will also need access to AC power outlets (2) and a connection to TV signal source - RF cable connect.
Pillow speaker
RF cable
STEP 1:
Set UP LCD TV
1) Connect TV Power cord to TV and AC outlet
2) Connect TV to Cable TV or Antenna (RF cable)
3) Verify basic TV operation using TV IR remote (on/off, volume, channels, etc.)
Step 2:
Auto Tune TV channels
1) While TV is on hit menu on IR remote
2) Select channel...auto channel ...enter
3) Select channel type...cable/air
4) Select automatic search...enter
TV will scan for channels
Items supplied with your HC20 healthcare TV
TV Remote
*******************
TV Manual
HC20 Power adapter
**************************
Power cord
Advertisement
Summary of Contents for Paradigm Multimedia HC20
- Page 1 How to Install Healthcare TV w/ HC20 Things you will need: Items supplied with your HC20 healthcare TV HC20 TV Remote HC20 Power adapter ********************* ******************* ************************** IR & Audio connection cable TV Manual Power cord You will also provide applicable pillow speakers at the bedside and jumper cables at the TV side. You will also need access to AC power outlets (2) and a connection to TV signal source - RF cable connect.
- Page 2 Note: If control is not established, check LED lights on HC20 –should be green. If green and amber both on - disconnect DC power cord and call number above. When operating correctly look for 2 amber LED light flashes with each pillow speaker command (e.g.