Troubleshooting - Zanussi ZBF11421SA User Manual

Hide thumbs Also See for ZBF11421SA:
Table of Contents

Advertisement

Available languages

Available languages

The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe
clean to ensure they are clean and free from
debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser and the
compressor at the back of the appliance
with a brush.
This operation will improve the performance
of the appliance and save electricity
consumption.
Defrosting the freezer
CAUTION!
Never use sharp metal tools to
scrape off frost from the evaporator
as you could damage it. Do not use
a mechanical device or any artificial
means to speed up the thawing
process other than those
recommended by the manufacturer.
A temperature rise of the frozen food
packs, during defrosting, may
shorten their safe storage life.
About 12 hours prior to defrosting,
set a lower temperature, in order to
build up sufficient chill reserve for
the interruption in operation.
A certain amount of frost will always form on the
freezer shelves and around the top
compartment.
Defrost the freezer when the frost layer reaches
a thickness of about 3-5 mm.
1. Switch off the appliance, or pull out
electrical plug from the wall socket.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place.
WARNING!
Do not touch frozen goods with
wet hands. Hands can freeze to
the goods.

Troubleshooting

WARNING!
Refer to Safety chapters.
www.zanussi.com
3. Leave the door open and insert the plastic
scraper in the appropriate seating at the
bottom centre, placing a basin underneath
to collect the defrost water.
In order to speed up the defrosting process,
place a pot of warm water in the freezer
compartment. In addition, remove pieces of
ice that break away before defrosting is
complete.
4. When defrosting is completed, dry the
interior thoroughly and keep the scraper for
future use.
5. Switch on the appliance.
After three hours reload the previously removed
food into the freezer compartment.
Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from electricity
supply.
2. Remove all food.
3. Defrost (if necessary) and clean the
appliance and all accessories.
4. Leave the door/doors open to prevent
unpleasant smells.
WARNING!
If the cabinet will be kept on, ask
somebody to check it once in a
while to prevent the food inside from
spoiling in case of a power failure.
19

Advertisement

Table of Contents
loading

Table of Contents