DSG IP1200C Quick Start

C C
1.

Before You Start

Subscribe an Internet access line from your local ISP. It could be ADSL, Cable Modem or Leased Line. You will be given the
following information: (1) Available IP address __________ (2) Gateway IP address __________ (3) Subnet mask __________.
If your LAN is behind NAT or firewall, you can assign a pseudo IP address to your IP1200C. IP1200C has preset UDP and TCP
ports allowing communication to get through NATs and firewalls. In general, you do not need to open ports on your network
gateway or router.
2.

Installation of IP1200C

Please refer to the diagram for installation. Be sure that the FXS interface is connected to the adequate lines or
equipment. FXS ports support connections from analog phones or the trunk side of a PBX.
After you connect IP1200C to your LAN, you can enter the
configuration mode via Telnet.
1. Select a PC connected to the same subnet of IP1200C.
Refer to IP1200C's default IP settings below to change
your PC's IP settings if necessary.
Default IP Address: 192.168.1.200
Default Gateway IP: 192.168.1.254
Default Subnet Mask: 255.255.255.0
2. Telnet IP1200C using its default IP Address.
3. Input the default Telnet Password: 0000
4. The prompt will display the setting items of IP1200C. You
can then start configuring your IP1200C.
3.

Input Basic IP Information

Input the IP Address, Gateway IP and Subnet Mask obtained from your ISP or network administrator. You can assign a real IP address or
pseudo IP address to your IP1200C.
1. At the prompt displays Select the option to setup:, input <1> and press ENTER to edit your IP Address.
2. At the prompt displays Select the option to setup:, input <2> and press ENTER to edit your Gateway IP Address.
3. At the prompt displays Select the option to setup:, input <3> and press ENTER to edit your Subnet Mask.
If your network is in DHCP environment, please skip the above setting items. At the prompt displays Select the option to setup:, input <5>
and press ENTER to enable DHCP function.
4.

Input Data Required for Device-to-Phone Mode

IP1200C provides Device-to-Phone Mode allowing you to place Internet calls to regular phone numbers worldwide. The settings below
help you to remain the same dialing habit.
1. At the prompt displays Select the option to setup:, input <9> and press ENTER to edit your Long Distance Code.
2. At the prompt displays Select the option to setup:, input <10> and press ENTER to edit your International Code.
3. At the prompt displays Select the option to setup:, input <11> and press ENTER to edit your Country Code.
For example, the Long Distance Code in U.S. is 1; International Code is 011; Country Code is 1.
5.

Check Account Balance and Call History

On IP1200C, the device main unit has a 5-digit ID which you can find from the setting item (0) Device ID or on the label of each device. Each
port of IP1200C has its 6-digit Device ID which composes of the 5-digit ID of the device and the 1-digit port number. The 6-digit port's Device
ID is your account of credit. Make sure you have sufficient credit in your account for making phone calls. For example: If your 5-digit Device
ID is 88888, your 6-digit port Device ID will be 888881 for port 1, 888882 for port 2 and so on.
To check account balances, first make sure your IP1200C is online. At the prompt displays Select the option to setup:, input <19> and press
ENTER to view the balance of each port's Device ID.
CONSOLE
Computer
DSG also provides a convenient CDR website for IP1200C. You can view your call detail
records (CDR) and account balance right after you hang up the phone. For details of
accessing DSG CDR website, please refer to http://cdr.dsgsvr.com or contact us at
sales@dsg.com.tw.
Quick Start for
Quick Start for
PWR MODE LINK
DEFAULT SECURITY S1 S2
ETHERNET
TCP/IP Network
IP1200C IP1200C
AC/DC
Adaptor
POWER (Back)
Voice over IP Gateway
L 5 L 6 L 7 L 8
L 1 L 2 L 3 L 4
FXS/Phone
3
1
6
#
0