Locking Desktop - Primux Brisa Manual

☆ ☆ ☆ ☆
Tap and hold the icon to drag and drop to to delete from
the desktop.

8. Locking desktop

A
B
If the PC won't be used for a long time, or the power switch is tapped, the device
enters standby state. The standby has two states. One is deep-sleep standby, in
which the screen is turned off; the other is light standby after pressing the power
switch. The picture shows the default light standby state. Tap and hold the unlocking
switch , and the A, B symbols as shown in the picture appear; point A is the
camera icon and point B is the unlocking icon. The system will prompt about the
path of unlocking. The ripple at point B in the picture is the path of the prompt. Tap
and drag the unlocking switch to point B to unlock the screen, tap and drag the
unlocking switch to point A to activate the camera function.
37