Telephone & Technical Support - Vizio VA19L HDTV10T User Manual

Problem
The picture has abnormal patterns
The display image does not cover
the entire screen
There is a picture but no sound
Your HDTV has pixels that are
always dark or colored
There is "noise" or "trash" on the
screen
The volume changes when you
switch inputs
Telephone & Technical Support
Products are often returned due to a technical problem rather than a defective product which may result
in unnecessary shipping charges billed to you. Our trained support personnel can often resolve the
problem over the phone. For more information on warranty service or repair, after the warranty period,
contact our Support Department at the number below.
Customer support and quality service are integral parts of VIZIO's commitment to service excellence.
For technical assistance, contact our VIZIO Technical Support Department via e-mail or phone.
Please have your VIZIO model number, serial number, and date of purchase available before you call.
Have your VIZIO model number, serial number, and date of purchase available before you call.
Version 9/12/2008
Solution
problem.
•
Check the connections on the back of your HDTV and on the back of the
component.
•
Make sure that the video input source is within the range of your HDTV.
Compare the video input source's specifications with your HDTV
specifications.
•
If you are in RGB mode (PC), make sure that H-Size and V.Position in the
OSD are set correctly. See "Adjusting the Setup Settings"
•
Press WIDE on the remote control to scroll through the screen modes.
•
Make sure that the volume is not turned down.
•
Make sure that the sound is not muted.
•
Check the connections on the back of your HDTV and on the back of the
component.
•
Your HDTV is manufactured using an extremely high level of precision
technology. However, some pixels of your TV may not display. Pixel defects
within industry specifications are inherent to this type of product and do not
constitute a defective product.
•
When your HDTVs' digital capabilities exceed a digital broadcast signal, the
signal is up-converted (increased) to match your HDTVs display capabilities.
Up-converting can cause noise or trash.
•
Your HDTV remembers the volume level from the last time you adjusted it.
If the sound level is higher or lower from another input, then the volume will
change.
Email:
techsupport@vizio.com
(877) 698-4946 Fax: (949) 585-9563
Hours of operation: Monday - Friday: 6 am to 9 pm
Saturday – Sunday: 8 am to 4 pm
VIZIO
Address:
39 Tesla
Irvine, CA 92618 USA
Telephone: (949) 428-2525 Fax: 949-585-9514
Web:
www.vizio.com
www.VIZIO.com
VIZIO VA19L HDTV10T User's Manual
42