Xtreme Power 81066 Owner's Manual And Safety Instructions

26cc 2-cycle gas

Hide thumbs

Table Of Contents

26CC 2-CYCLE GAS HEDGE TRIMMER

ITEM: 81066

OWNER'S MANUAL AND SAFETY INSTRUCTIONS

SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,

OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S

SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH

AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Table of Contents

Need help?

Do you have a question about the 81066 and is the answer not in the manual?

Questions and answers

Summary of Contents for Xtreme Power 81066

Page 1 26CC 2-CYCLE GAS HEDGE TRIMMER ITEM: 81066 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
Page 2 IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
Page 3 IMPORTANT SAFETY INFORMATION Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed. Check that the cutting attachment is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used. Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.
Page 4 PRODUCT INFORMATION / PARTS LIST SPECIFICATIONS NOTE: Specifications are subject to change without notice.
Page 5 OPERATION WARNING: Using pure gasoline will damage the engine. When refilling, make sure the fuel is the correct WARNING: Fuel will corrode if it is under the influence of UV or high temperatures for extended periods. Mixed fuel should be used within 30 days. WARNING: Using fuel with water will corrode the engine and carburetor.
Page 6 TROUBLESHOOTING and MAINTENANCE...
Page 7 MAINTENANCE and STORAGE Air Cleaner: Every 25 hours, please remove the cleaner’s outside cover. Then clean the inside dust. When the element is dirty, clean it in warm water and dry it before installing. A clogged cleaner will reduce engine performance. If there is no cleaner or it is damaged or deformed, NEVER start the machine, otherwise the engine will damage quickly.
Page 8 OF NOTE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.