Page 2
FRONT BACK Control Panel Remote Control Sensor Air Outlet Upper Air Inlet Grill Handle Power Cable Air Exhaust Outlet Lower Air Inlet Grill Lower Air Inlet...
Page 3
Never use the mains switch to start and stop the unit. If the air conditioner is knocked over during use, turn off the Always use the switch on the control panel. unit and unplug from the mains supply immediately. Turn off the unit when not in use. If the unit is not going to be Your air conditioner should be used in such a way that it is used over a long period of time, disconnect from the mains.
Page 4
If you need to bend the exhaust duct, please refer to the following: To connect the air exhaust: Clip A Clip B 1. Position the product close to a window or outside door, CAUTION ie, Patio door. 2. Fix the square end of the exhaust duct (Clip A) to the 1.
Page 5
Allow this unit to stand for at least 4 hours before using for the first time. Control Panel Functions of the Control Panel Remote Control Indicator 1. ON/OFF Key - Press once to start, and press once more to stop. Temp.
Names and functions of the remote controller LCD Screen Note: Ensure the remote is aimed at the remote control sensor on the product. MODE Key - Press the MODE key to scroll through the following: COOL/FAN/AUTO. Please Note: To select DRY mode, use the DRY Key. SEND Key - Press this key to send the operation.
CAUTION: Please note: Turn off the product and disconnect from When the tank is full the indicator will flash the mains supply. and the buzzer will sound.The LCD display Rubber Plug will show error code H8 and the unit will Always ensure drainage holes are sealed stop running.
CLEANING This air conditioner features an advanced filtration system using filters to clean, deoderise and collect dust from the air. Use a soft, damp cloth to wipe the body of the unit clean. Never use chemicals, gasoline CLEANING THE FILTER detergents, chemically treated clothes or other cleaning solutions.
The machine doesnt run Is the machine plugged in and the mains supply on? SPECIFICATIONS Is the room temperature within the working range of the unit (16 C - 32 C)? Power supply: 230-240V The machine is very noisy Is the floor underneath the unit uneven? Make sure all Cooling capacity: 9000/2600BTU/Hr four castors are positioned flat against the floor.
Need help?
Do you have a question about the MAT-9KACW and is the answer not in the manual?
Questions and answers