Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Summary of Contents for OpenVox IPC100 Series
- Page 1 Hardware installation guide 深圳开源通信有限公司 OpenVox-Best Cost Effective Asterisk Cards OpenVox IPC100 Series Atom Fan-less CPU Boards Hardware Installation V1.0.03 Hardware Version: V1.2 OpenVox Communication Co. Limited URL : http://www.openvox.cn...
- Page 2 Hardware installation guide 深圳开源通信有限公司 OpenVox-Best Cost Effective Asterisk Cards OpenVox Communication Co. Ltd. Address: F/3, Block No.127, Jindi Industrial Zone Shazui Road, Futian district, ShenZhen, Guangdong 518048, China Tel: +86-755-82535362, 82535095, Fax: +86-755-82535174 E-mails: sales@openvox.cn support@openvox.cn, james.zhu@openvox.cn Business Hours: 9:00 AM-18:00 PM from Monday-Friday URL: http://www.openvox.cn...
- Page 3 Hardware installation guide OpenVox Communication Co. Limited URL : http://www.openvox.cn...
-
Page 4: Table Of Contents
5.2.1 Loading BIOS default value ................... 26 5.2.2 Modify system DATE and TIME ................26 5.2.3 Modify serial port baud rate ................... 27 5.2.4 PXE remote boot function setup ................28 5.2.5 PCI slot IRQ setup....................28 OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 5: Compliance Information
Hardware installation guide 1. Compliance Information 1.1 EMI and EMS For FCC, OpenVox IPC100 has been tested as a CPU board installed in an enclosure. No further testing is needed if the board works with other components FCC qualified Please see http://www.fcc.gov/oet/... -
Page 6: Introduction
2. Introduction 2.1 Features OpenVox IPC100 is a reliable mini-ATX board. The fan-less design, as low as 6W power, enables more abilities to operate in harsh industrial environments. Integrated up to 3 Ethernet ports, IPC100 motherboard provides flexible options for different targets. -
Page 7: Oem Information
The following options can be configured for OEM options: DRAM size (1GB, 2GB) ◆ CPU speed (1.1 GHz/ 1.3GHz / 1.6GHz) ◆ Configuration options: ◆ 2×100Mbps / 1×Gigabit 1×100Mbps / 1×Gigabit 2×100Mbps 1×Gigabit 0°C to 85°C (only @ Z510PT/Z520PT) ◆ OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 8: Compatibility
Mini PCI slot: Broadcom BCM4318 wireless LAN adapter ◆ Intel(R) PRO/Wireless 2200BG Network Connection ◆ Intel(R) PRO/Wireless 2915BG Network Connection ◆ Mini PCI cards: OpenVox B400M, B200M, B100M, A400M ◆ Memory: Kingston KVR667D2S5/1G, KVR800D2S6/1G, KVR533D2S4/512MB ◆ 3.2 Operating system Results System... -
Page 9: Connectors And Definitions Of Jumpers
Hardware installation guide 4. Connectors and Definitions of Jumpers 4.1 Layout Figure-1 IPC100 Layout OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 10: Connectors
PS/2 Keyboard and Mouse Port CN25 SATA Power Supply CN30 44 Pin IDE Interface CN32 Compact Flash Interface CN33 SATA Interface CN34 USB Port CN35 Main Power in Jacket CN43 LPC Interface Table-3 Connectors OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 11: Descriptions
Figure-2 IPC_VGA Interface Name Name RED positive Reset# Red negative Ctrl CLK Green positive Green negative 3.3v Blue positive 3.3v Blue negative 3.3v CLK positive 3.3v CLK negative Ctrl Data Table-4 IPC_VGA Interface Pins OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 12: Cn2 External Leds And Gpio
(3) CN6 clears CMOS Setting Function Close 1-2 Clear CMOS Open 1-2 (default) Normal Table-6 CMOS Setting (4) CN9 Power Supply Jacket DC out @12V Name Figure-4 Power Jacket Table-7 Power Jacket Pins OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 13: Cn13 Ddr2 Memory Slot
RESERVED_WIP5 3.3V C/BE[2]# GROUND INTA# AD[16] GROUND RESERVED IRDY# AC_SYNC RESERVED Ground M66EN GROUND 3.3V AC_SDATA_IN 3.3VAUX FRAME# AC_SDATA_OUT CLKRUN# AC_BIT_CLK RST# TRDY# AC_CODEC_ID0# GROUND SERR# AC_CODEC_ID1# 3.3V STOP# AC_RESET# REQ# GROUND MOD_AUDIO_MON OpenVox Communication Co. Limited URL : http://www.openvox.cn... - Page 14 Support for a maximum speed of 100Mbps Ethernet Name Name Table-9 10/10M Ethernet Port Pins (8) CN19 Giga Ethernet Port Name Pin Name BI_DA+ BI_DC- BI_DA- BI_DB- BI_DB+ BI_DD+ BI_DC+ BI_DD- Table-10 Giga Ethernet Port Pins OpenVox Communication Co. Limited URL : http://www.openvox.cn...
-
Page 15: Cn20 Rs232 Serial Port
(11) CN25 SATA Power Supply Figure-5 SATA Power Interface Name Name Ground Ground Table-13 SATA Power interface pin NOTE: Before using the jacket, make sure the voltage of DC-in jacket (CN35) be 12V +5% below. OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 16: Cn30 44 Pin Ide Interface
Drive 1 or 2 Drive 1 or 2 Name Name /RESET /DIOW /DIOR IORDY SPSYNC:CSEL /DMACK DD10 INTRQ DD11 /IOCS16 DD12 PDIAG DD13 /IDE_CS0 DD14 /IDE_CS1 /ACTIVE DD15 DMARQ Table-14 IDE Interface Pins OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 17: Cn32 Compact Flash Interface
Hardware installation guide (13) CN32 Compact Flash Interface Name Name /CD1 /CE1 /CE2 /VS1 /IORD /IOWR /READY:/RDY:/IREQ CSEL /VS2 RESET /WAIT /INPACK /REG /BVD2:SPKR /BVD1:STSCHG /WP:/IOIS16 /CD2 Table-15 Compact Flash Interface Pins OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 18: Cn33 Sata Interface
Table-17 USB Interface Pins (16) CN35 Main Power Jacket DC in @12V Name Table-18 Main Power jacket Pins (17) CN43 LPC Interface Name Name LPC_CLK SERIRQ +3.3V FRAME# 48MHz_CLK Table-19 LPC Interface Pins OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 19: Jumpers
II CF card/an IDE hard disk drive. 2. Before installing CF card or IDE hard disk, SATA (close 5-6) should be disabled. If not, system will spend much time to detect IDE devices. OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 20: Indicators Of System Status
LED6 will be light off 480H+09H Bit2 Bit2=1 LED16 will be light on Bit2=0 LED16 will be light off 480H+08H Bit3 Bit3=1 LED17 will be light on Bit3=0 LED17 will be light off OpenVox Communication Co. Limited URL : http://www.openvox.cn... - Page 21 As output port, set Bit6=0, CN2.7 will put out Low level As input port, feeding High level to CN2.7, automatically bit6 setting to 1 As input port, feeding Low level to CN2.7, automatically bit6 setting to 0 OpenVox Communication Co. Limited URL : http://www.openvox.cn...
-
Page 22: Bios Setup Utility
5.1 Enter BIOS setup menu When system adds power up, press F4 on keyboard of remote PC connected IPC100’s serial port. Figure-6 System power up Notice: Press F1 when following picture appeared Figure-7 Press F1 or F2 OpenVox Communication Co. Limited URL : http://www.openvox.cn... - Page 23 Hardware installation guide System will show the main menu: (1) Main menu Figure-8 Main menu (2) Press “↓” key , you will see submenus as following: Advanced menu Figure-9 Advanced menu OpenVox Communication Co. Limited URL : http://www.openvox.cn...
- Page 24 Hardware installation guide (3) PCIPnP menu Figure-10 PCIPnP menu (4) Boot menu Figure-11 Boot menu OpenVox Communication Co. Limited URL : http://www.openvox.cn...
- Page 25 Hardware installation guide (5) Security menu Figure-12 Security menu (6) Chipset menu Figure-13 Chipset menu (7) Exit menu Figure-14 Exit menu OpenVox Communication Co. Limited URL : http://www.openvox.cn...
-
Page 26: General Bios Setup
(2) Press “Enter” key to confirm the new time or date. (3) Select “Exit” menu, and highlight “save changes and exit” item. Figure-17 Save and Exit (4) Select “OK” to confirm the change. OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 27: Modify Serial Port Baud Rate
(4) Press the enter key, and then select an option you want to edit. (5) Select “Exit” menu, and highlight “save changes and exit” item. Figure-20 Save and Exit (6) Select “OK” to confirm the change. OpenVox Communication Co. Limited URL : http://www.openvox.cn... -
Page 28: Pxe Remote Boot Function Setup
(5) Select “Exit” menu and highlight “save changes and exit” item, select “OK” to confirm the change. 5.2.5 PCI slot IRQ setup IPC100 series board provides two mini PCI slots (3.3v). You can install standard mini PCI card. The IRQ can be relocated as following. (1) Select “PCIPnP” menu Figure-21 PCI slot IRQ (2) Press “↓”... - Page 29 IRQ14: Primary IDE channel IRQ12: PS/2 mouse (5) Press the enter key (6) Select “Exit” menu, and highlight “save changes and exit” item. Figure-23 Save and Exit (7) Select “OK” to confirm the change. OpenVox Communication Co. Limited URL : http://www.openvox.cn...
Need help?
Do you have a question about the IPC100 Series and is the answer not in the manual?
Questions and answers