Page 2
Step 2 Configure and install a Compact Flash card To use your vehicle-mount ALIX, you will need to have a CF card with a suitable operating system installed in the CF socket on the vehicle-mount ALIX board. If your CF card does not already have an operating system installed, you can either mount the CF card in another machine (e.g.
Page 3
Step 5 Reinstall the board into the case Before you can begin using your vehicle-mount ALIX, you will need to reinstall the board into the case. 1. Slide the board, with end plate attached, back into the case, ensuring that the edges of the board are inserted into the slots in the sides of the case.
Page 4
2.1mm internal, 5.5mm external, centre positive plug. The vehicle-mount ALIX will go through its boot up cycle, which you can watch if you are connected to the serial console. The behaviour of the three LEDs on the vehicle-mount...