Maine Cottage Calvin Bed Assembly Instructions page 3

STEP ONE:
ASSEMBLE HEADBOARD & FOOTBOARD
Screw each of the eight threaded bolts into
each of the eight inset threaded collars
located on the inside of both the Foot Posts
and Head Posts. Then screw a nut halfway onto
each of the bolts.
Back Side of Head Rail
Front Side of Head Rail
Back Side of Head Rail
Insert 2 dowels into the top and bottom holes
of each end of the Foot Rail, Head Rail, and
Headboard.
Front Side of Head Rail
To assemble the headboard, lay out the two
Head Posts (with holes facing each other) on
either side of the Headboard and Head Rail.
Insert/connect he dowels you just inserted
into the Headboard and Head Rail into one of
the Head Posts, then the other. Draw the three
components together. Note that the Tightening
Pockets should all be on the back side of the
bed.
Insert U-Shaped Washers between the Hex Nut and
the wood of the Tightening Pocket. Use the provided
Hex Wrench to tighten. Repeat in all eight Tightening
Pockets.
866-366-3505 M-F, 9-5
Inside of Foot Rail