Advertisement
Quick Links
Following these mounting instructions with the hardware included will be more than
sufficient to support vanity installation.
Included Sink Installation Hardware
x2
Vanity Installation Hardware
x8
Tools You May Need
Level
Hanger
Bolts
(8mm)
Expansion
Anchor
Bolts
Hammer
Drill
Installation Instructions
x2
Washer
Insulation
x2
Sleeve
Mounting
x2
Bracket
Bottom
x1
Mounting
Bracket
Tape
Measure
New Space Collection
x2
x2
x4
x8
Phillips
Screwdriver
Wall Anchor
Nuts
Handle
Screw
Caulk
1
Advertisement
Summary of Contents for Nameek's New Space Series
- Page 1 Installation Instructions New Space Collection Following these mounting instructions with the hardware included will be more than sufficient to support vanity installation. Included Sink Installation Hardware Wall Anchor Washer Hanger Bolts (8mm) Insulation Nuts Sleeve Vanity Installation Hardware Mounting Handle Bracket Expansion Anchor...
- Page 2 1. Prepare Location Locate studs in the wall. If the studs do not line up with the holes in the back of the sink and vanity, be sure to add sufficient wall supports behind the finished wall. 2. Mount Vanity Brackets Mark the desired height of the vanity on the wall.
- Page 3 3. Install Vanity Base Hang vanity base on mounting brackets. Use a phillips head screwdriver for adjustments and tightening. 4. Attach Vanity Handles Use a phillips head screwdriver to attach handles to vanity doors and drawers.
- Page 4 5. Install Hanger Bolts Measure the distance between mounting holes in the back of the sink. Drill pilot holes and screw in hanger bolts. Check the position with a level. 6. Mount Sink With Washers and Nuts Thread the sink on to the two hanger bolts.
- Page 5 7. Install Caulk Finish the sink installation with a bead of caulk between the sink and wall. Click-Clack Drain Faucet 8. Vanity Accessories Complete your installation by adding the preferred plumbing accessories, such as the faucet, click clack drain, p-trap and angle valves to your vanity.