Page 2
Anschlussart Z: Elektrokabel nicht austauschbar Montage- und Sicherheitshinweise Die Heizmatten dürfen nur in Verbindung mit unseren Monoflo-Regler Nr. 50805 installiert werden. Dabei sind die Vorschriften für den Einbau des Reglers zu beachten. Die Heizmatten sind vor spitzen Gegenständen zu schützen, sie dürfen nicht gebogen, angebohrt oder durchbohrt werden.
Page 3
Installation: nur durch einen Elektro-Fachbetrieb Einstellmöglichkeit: 25 – 40°C FI-Schalter: gesetzlich vorgeschrieben Hersteller: Monoflo Produktions GmbH & Co KG Montage- und Sicherheitshinweise Der Regler ist auf einem festen und nicht brennbaren Untergrund zu befestigen. Die im Liefer- umfang enthaltenen Zugentlastungsstopfen sind an dem Reglergehäuse zu befestigen. Je nach Elektrokabelführung sind vorher die Löcher in das Gehäuse zu bohren!
Page 4
The heat mats can only be used in combination with our Monoflo controller No. 50805. The heat mats must be protected from sharp objects, they may not be bend or drilled. The must be securely fastened through the existing holes onto a stable and even surface.
Page 5
Temperature: adjustable 25°C – 40°C Installation: only through an electrician FI-switch: Installation of this switch is mandatory Manufacturer: Monoflo Produktions GmbH & Co KG Installation The controller must be mounted on a solid and not flammable surface. The enclosed plugs that avoid the wires from being pulled out need to be fitted into the housing.
Need help?
Do you have a question about the Heat mats and is the answer not in the manual?
Questions and answers