HowayGIS P78 Quick Start Manual

8” rugged high-accuracy gis collecter

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

P78

8" Rugged High-accuracy GIS Collecter

Quick Start

Version 1.0

Table of Contents

Need help?

Do you have a question about the P78 and is the answer not in the manual?

Questions and answers

Summary of Contents for HowayGIS P78

Page 1 8” Rugged High-accuracy GIS Collecter Quick Start Version 1.0...
Page 2: Table Of Contents
Catalogue Disclaimer ..................1 About This Manual ................ 1 Technical Support ................2 Parts of the Device ................ 3 Dimension ..................4 Installing microSD and SIM Card ........... 5 Charging the Battery ..............6 Installing APK File ................ 10 Turn on GNSS module ..............13 Ntrip connection .................
Page 3 2019...
Page 4: Disclaimer
If you are not sure about any description in this manual, consult your vendor before further handling. We recommend that you keep one copy of this manual for the quick reference for any necessary maintenance in the future. Thank you for choosing HowayGIS products.
Page 5: Technical Support
You can download the related technical documents such as datasheet and user’s manual as well as driver on our website. Please do not hesitate to call or e-mail our customer service when you still cannot get the information you need. http://en.howaygis.com/lxwm/c=6&i=9&comContentId=9.html E-mail: supports@howaygis.com...
Page 6: Parts Of The Device
Parts of the Device Power button Function Key ( free for your assigned function 10 Speaker GNSS antenna 11 Battery Pogo pin 12 Camera flashlight USB connector Front Camera 13 Rear Camera Light sensor 14 NFC Touch panel 15 Volume key Microphone 16 SD card slot...
Page 7: Dimension
Dimension...
Page 8: Installing Microsd And Sim Card
Installing microSD and SIM Card Figure 1 Screw off and remove the cover. Figure 2 Follow the Figure 3 Open the lid and Figure 4 Close the lid and direction of red arrow to insert the mSD card into follow the direction to open the lid of mSD slot.
Page 9: Charging The Battery
Be sure to charge the battery to full when you are charging it for the first time. Caution: Do not charge the P78 via computer USB connection due to that the voltage output from computer USB is not enough to charge the device.
Page 10 4. Accessing Battery Chamber i) Place the device on a flat Retaining screws surface, with the rear side facing up. Loosen the retaining screws on the battery cover with a coin. ii) Remove the battery cover using the notch located on the bottom edge.
Page 11 iii). The battery is in a compartment inside. Its opening is covered by a protective lid. Insert the tip of your finger onto the top of the cover and remove Protective lid iv) Then you can remove the battery from the chamber. v) Installing Battery To install the battery, orient thebattery so that the contact...
Page 12 Getting Started Slide the battery into the battery chamber. To restore the protective lid, make sure the lid is oriented as shown in the photo to the right. Align the top edge of the lid with the top of the opening. Press the lid firmly into place to ensure it is secured.
Page 13: Installing Apk File
Replace the battery cover and secure the retaining screws with a coin. Installing APK File 1. Swiping down the Status Bar will bring up a Quick Settings panel, tap the ‘Airplane mode’ to turn ‘Airplane mode’ on. 2. Tap Settings | About phone | Build number,...
Page 14 3. Tap Build number three times, change the P78 USB work mode to ‘Develop Mode’ 4. Turn USB debugging on.
Page 15 5. Connect the P78 to the computer using a USB cable. The P78 will prompts you to choose a USB option. Tap USB for photo transfer | Transfer files to transfer files between your computer and the P78. 6. Copy the APK file from your computer to the P78’s internal USB storage or SD card.
Page 16: Turn On Gnss Module
8. Click the APP, then install the APP according to the tips on the screen. Turn on GNSS module 1. Copy then newest apk of HyperGIS into P78 by USB cable 2. Install it according to the tips on the screen.
Page 17 4. Click on ‘Data Source Type’, then select ‘Serial’. 4. Click on ‘Data Source Config’, then select ‘ttyMT2’ and ‘38400’.
Page 18: Ntrip Connection
4. Turn ‘Data Source Connect’ on Ntrip connection 1. Click Ntrip Connect, then click ‘Protocol Type’ after GNSS module be turned on.
Page 19 2. Click ‘Protocol Type’, select ‘Ntrip’ 3. Click ‘IP’...
Page 20 4. Add or Edit a new cors account, then click ‘OK’. 5. Click ‘MountPoint’. Select ‘update SourceTable’ to update mountpoint list. Orselect the right mountpoint.
Page 21: Gnss Data Record
6. Turn ‘Ntrip connection’ on. It’ll connect to cors station automatically GNSS data record 1. Click ‘Data Debug’...
Page 22 2. Select ‘log’, then input the file name for the data recording. 3. If you want to stop the data recording, uncheck ‘Log’. Find the reorded files from Internal shared storage|HyperGIS|GpsLogger...
Page 23: Gnss Status
GNSS Status 1. Click button to check the GNSS status. 2. Differet display mode...
Page 24: Send Command To Gnss Module
Send command to GNSS module 1. Go to ‘Data Debug’ interface of the app, select ‘File’, then file the command files.
Page 25 2. Select one of the command files, then click ‘Send’.
Page 26: Important Safety Instructions
3. Repeat the steps until sending all the command files. Important Safety Instructions Read these safety instructions carefully: Read all cautions and warnings on the equipment. Place this equipment on a reliable surface when installing. Dropping it or letting it fall may causedamage Make sure the correct voltage is connected to the equipment.
Page 27 Disconnect this equipment from the A/C outlet before cleaning it. Use a moist cloth. Do not use liquid or sprayed detergent for cleaning. Tofully disengage the power to the unit, please disconnect the power from the ACoutlet. Do not scratch or rub the screen with a hard object. Never use any of the solvents, such as Thinner Spray-type cleaner, Wax, Benzene, Abrasive cleaner, Acid or Alkaline solvent, on the display.
Page 28 10. Remove dirt with a lightly moistened cloth and a mild solventdetergent. Then wipe the cabinet with a soft drycloth. 11. The openings on the enclosure are for air convection and protect the equipment from overheating. DO NOT COVER THE OPENINGS. 12.
Page 29: Rechargeable Battery Pack Safety
Do not use the power adapter that isn’t made for the equipment. Supplying the equipment with inappropriate voltage may cause harm to the battery or, even worse, burn the equipment. Toprevent possible hearing damage, do not listen at high volume levels for long periods Rechargeable Battery Pack Safety With very little care, you can optimize the battery life and maximize the lifespan of...
Page 30 charged, and get recharged every three months. If you store an uncharged battery, it could fall into a deep worn-out state which would render it incapable of holding any charge. Be sure to store the equipment and battery at the proper temperature (as described in -20°C ~ 60°C / -4°F ~ 140°F).
Page 31: Disposing Of The Equipment
Disposing of the Equipment  Within the European Union EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords.
Page 32: Warranty
Warranty This product is warranted to be in good working order during the warranty period. Should this product fail to be in good working order at any time during this period, we will, at our option, replace or repair it at no additional charge except as set forth in the following terms.