Table of Contents
Advertisement
5. FreeSync: Select support of FreeSync or not, default is on.
Note: FreeSync Setting
• If Free-Sync is "ON", then the Over Drive selection is set to
"Normal" automatically
• If Free-Sync is "OFF", then the user can set Over Drive to
either one of the three settings including: (a) Extreme (b)
Normal (c) Off
6. Aim Point: Show an Aim Point on the screen for shooting games.
Adjusting the OSD
Picture
Color
Audio
Gaming
OSD
System
Information
Save Settings to...
1. Press the MENU key to open the OSD.
2. Using the / keys, select OSD from the OSD. Then navigate to the setting you wish
to change.
3. Use the / keys to adjust any sliding scales.
4. Language: Set the OSD menu language.
5. OSD Timeout: Adjust the delay before turning off the OSD menu.
6. Transparency: Select the transparency when using gaming mode. The transparency
can be 0% (OFF), 20%, 40%, 60%, or 80%.
7. Refresh Rate Num: Display the panel's current refresh rate on the screen.
Note: If FreeSync sets "On" you can see the V Frequency to changes
in the OSD.
Mode - Standard
Language
OSD Timeout
Transparency
Refresh Rate Num
Engilsh
120
Off
Off
15
Advertisement
Table of Contents
