Supertech TRAILER VALET Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OWNER'S MANUAL

WARNING: Carefully read and understand all the instructions before mounting your new Trailer Valet.

Failure to follow these guidelines and common sense may result in serious injury to persons and

property for which the manufacturer cannot be held liable.

artwork contained herein may be reproduced in any shape or form without the express written consent

of SuperTech S. Corporation.

Page 1

Table of Contents

Need help?

Do you have a question about the TRAILER VALET and is the answer not in the manual?

Questions and answers

Summary of Contents for Supertech TRAILER VALET

Page 1 Copyright 2012 by SuperTech S. Corporation. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of SuperTech S.
Page 2 Designed for trailers up to 5,000lbs the Trailer Valet can safely propel trailers up and down slopes up to 32 degrees. The Trailer Valet is for use only on paved surfaces that are free of debris. Wheel size: 9 inches...
Page 3 Cylindrical tongues are not compatible with the Trailer Valet as it will rotate, allowing the trailer to drop. 2. The safest way to install the Trailer Valet is while the trailer is securely mounted to your vehicle. 3. When choosing a location for the mounting clamp, choose a location where the Trailer Valet will be able to freely rotate from its vertical operation position to its horizontal stow position.
Page 4 Trailer Valet and continue to the next point. If not, adjust and test again. 7. Evenly tighten the 4 bolts. Do not over tighten the bolts. Attach the Trailer Valet and set the stow pin to secure the Trailer Valet and set the cotter pin to secure the stow pin.
Page 5 To apply the brake, simply drop the steering handle with one smooth motion. This will lock the brake. The Trailer Valet brake is not intended to regularly stop your trailer if it is in motion. Over time this can cause excessive wear/damage and is considered misuse of the brake.
Page 6 Trailer Valet jack until your hitching mechanism securely locks in place. Continue to raise the Trailer Valet wheels up off the ground until it stops and replace the rotation pin (part #23). Then remove the cotter pin from the stow pin and stow pin from the mount bracket, and either rotate the Trailer Valet into its travel position, replacing the stow pin and cotter pin;...
Page 7 1 Year Limited Warranty Against Defects In Manufacturing This limited warranty does not cover claims resulting from misuse, failure to follow the instructions on installation, maintenance and use, abuse, alteration, involvement in an accident, commercial use and normal wear and tear. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTY, WRITTEN OR ORAL, INCLUDING BUT NOT LIMITED TO ANY EXPRESS WARRANTY OF MERCHANTABILITY OR FITNES FOR A...
Page 8 Page 8...