Subscribe to Our Youtube Channel
Related Manuals for AJA HD10AMA
Summary of Contents for AJA HD10AMA
- Page 1 HD10AMA HD/SD 4-Channel Analog Embedder/Disembedder User Manual ® September 25, 2008 P/N 101659-01...
-
Page 2: Fcc Emission Information
AJA Video, with shipping charges prepaid. AJA Video shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the AJA Video service center is located. -
Page 3: Block Diagram
AJA HD10AMA HD/SD 4-Ch Analog Embedder/Disembedder User Manual — Introduction Introduction The HD10AMA is a dual rate 4 channel analog audio Embedder/Disembedder. The Disembedder is always functional providing 4 outputs. The Embedder is user selectable, on a channel pair basis, to either “pass” input audio or embed input audio from the breakout cable. - Page 4 Analog I/O D-connector (attaches to HD/SD-SDI Input supplied cable) Configuration HD/SD-SDI Determined by Output 1 DIP switch on other side of HD/SD-SDI Converter Output 2 + 5 to 18VDC Power Input Cable Not Shown To Scale HD10AMA and Cable, Side View...
-
Page 5: User Controls
AJA HD10AMA HD/SD 4-Ch Analog Embedder/Disembedder User Manual — User Controls User Controls The user interface for the HD10AMA is an 8-switch DIP Switch Setting LEFT RIGHT DIP accessible through a cut-out in the bottom of the unit. Use the DIP switches to configure how the Analog embedding and disembedding functions. - Page 6 Switch 2 (EMBD 3/4)—Controls Audio Embedding for Channels 3/4 LEFT RIGHT Overwrite or embed new If AUX Jumper is OPEN: Pass any channel 3/4 packets channel 3/4 packets on input SDI. If AUX Jumper is CLOSED: Delete all packets from input SDI. Switches 3 and 4 (EMBD GRP L) and (EMBD GRP H)—...
- Page 7 AJA HD10AMA HD/SD 4-Ch Analog Embedder/Disembedder User Manual — User Controls Switch 3: EMBD GRP L Right (1), Switch 4: EMBD GRP H Right (1) Audio Embedded Embedded Input Output Output Channel Group Channel 1 —> 2 —> 3 —>...
- Page 8 Switch 5: DISEMBD GRP L Right (1), Switch 6: DISEMBD GRP H Right (1) Audio Embedded Embedded Output Input Input Channel Group Channel 13 —> 14 —> 15 —> 16 —> Switch 7 (LEVEL)—Control Whether Audio Levels are Professional Or Consumer. Affects all 4 Inputs and Outputs LEFT RIGHT Professional Levels...
-
Page 9: Installation
1. disconnect +5VDC from the converter 2. configure the DIP switch for the desired equipment configuration and video formats 3. connect video equipment to the converter BNCs 4. apply +5-18VDC power to the converter (AJA power supply model DWP) Specifications Item Specification...
Need help?
Do you have a question about the HD10AMA and is the answer not in the manual?
Questions and answers