Advertisement

Quick Links

Varde Oslo
Installation— and
User guide
Revision 2
1

Advertisement

Table of Contents
loading

Summary of Contents for VARDE OVNE Oslo Series

  • Page 1 Varde Oslo Installation— and User guide Revision 2...
  • Page 2: Table Of Contents

    Congratulation on purchasing your new stove Varde Ovne A/S is a Danish company specializing in functional, environmentally friendly and designed quality stoves. Index Welcome and index Page 2 Technical Oslo Page 3 Regulations and approval Page 4 Flooring and distance...
  • Page 3: Technical Oslo

    Technical Specifications Oslo Model 6701000 Oslo Hight (mm) Wide (mm) Depth (mm) Weight (kg) Effect 3,6-4,1 kW Nominal Output 4 kW Heated area 30-105m2 Efficiency 78 % Flue gas data: 4,4g/sek.,245°C ved 20°C, 11 pa. Combustion chamber: (H x W x D): 264 x 410 x 256mm Flue outlet Ø...
  • Page 4: Regulations And Approval

    J. other fireplaces, as long as the appropriate rules and regulations are adhered to. All Varde Ovne stoves are closed fireplaces. Please Note! You are by law required to register your stove at the local chimney-sweeper. Until installation keep the stove dry and not to cold. The stove cannot stand moisture.That an existing chimney, not necessarily is effective enough for a new modern stove.Vermiculite is a...
  • Page 5: Flooring And Distance

    Flooring: If the floor on which the stove is to be placed is inflammable, the floor must be covered with non -flammable material, such as steel or glass plate, floor tiles or artifical slate, covering an area of at least 15 cm from the sides of the stove and at least 30 cm from the front of it. Regarding the front, however, we recommend 50 cm.
  • Page 6: Chimney

    The chimney: All Chimneys should be swept and inspected before installation of any appliance. For Relining existing chimneys 316 or 904 grade stainless steel liners or pumice cement liners in accordance with Building Regulations Approved Document J should be used. Liners should be suitably insulated.
  • Page 7: Air Supply

    Continual fresh air A continual supply of fresh air is required in the room in wich the stove is situated. This can be achieved by installing 1-2 vents, whilst also ensurring that these can not be blocked. The quanti- ty of air used for burning, is approx.
  • Page 8: Operation

    How it works — Operation Combustion Air Throttel Combustion Air 2 Turn the Throttel Push the Air Throttel 2 towards left 3. towards right for closing Air Inlet. Your Stove is now in ignition position. Once the fire has caught properly, regulate by pushing the handle 2 towards right 4.
  • Page 9: How To Light And Stoke A Fire

    How to light and stoke a fire The first time you light up the stove, the enamel will temper and give off some smoke and a slightly burnt smell. We recommend that you leave doors and windows open, as airing the room will make the smell disappear.
  • Page 10: List Of Accessories

    Operation Vermiculit plates Cast iron Door Top Plate, Sheet metal. Thottle for Primary Air Thottle for Combustion Air Support Plase Beaware and take precautions: The radiant heat from the furnace is very high - note that there are no flammable materials near the oven, as well as the safety distance is observed, see page 5 Use of fireguard When using the stove in situations where children and or infirm persons are present a fireguard...
  • Page 11: Vermiculite

    Vermiculite is a very porous material and should be handled with care. When refilling the stove, stoke the wood carefully and use a glove. Only use original parts from Varde Ovne A/S Vermiculit sæt, Vare nr.: 6701xxx...
  • Page 12: How To Choose The Wood

    What kind of wood to use? The new stove Generally, beech wood is considered the best The first time you light up the stove the ena- type of wood for burning. It burns evenly mel will temper, and give off some smoke and without producing much smoke and ashes are a slight smell.
  • Page 13: Maintenance

    You do not need to re- place the plate until the gap is 5 mm wide. Only use original parts from Varde Ovne A/S The door is equipped with a spring, which pulls the gate closed. This is a legal requirement in many countries.
  • Page 14: Troubleshooting

    Troubleshooting. Smoke enters the room • Not enough draught in the chimney. • Inspect the flue pipe or the chimney for blockage. • Make sure the height of the chimney is correct. The glass or the chimney soots up • The wood is too moist. •...
  • Page 15: Spare Parts

    Spare Parts If Spare parts at any time should be needed, please chech the list below. Vermiculit Set, Item no.: XXXX Sealings, Item no.: 1101 Glass , Item no.: 1130503 Handle, Item no.: 11306124 Cast iron Door , Item no.: 1130526 Glass spring with screws, Item no.: 10013...
  • Page 16: Recess Example

    Recess example Wall of combustible material Wall of non-combustible mate- rial, made of 100 mm aerated concrete in the recess example. Wall of non-combustible mate- rial that is not in contact with combustible material and the- refore has no minimum thich- ness requirement.
  • Page 17: Test Certificate Smoke Control

    Test certificat Smoke Control DEFRA in England NS 3058/3059...
  • Page 18: Test Certificate (Teknologisk Institut)

    Test certificat from Teknologisk Institut is scanned and placed here.
  • Page 19: Warranty

    Warranty All Varde stoves go through a close quality inspection, and we take pride in always delivering products of a consistent quality. This being so, manufacturing faults may still occur, and on these we offer a 5 year warranty. The warranty does not include: ·...
  • Page 20 Kongevej 246, 6510 Gram, Danmark, Tel. +45 7482 0003. vardeovne.dk...

This manual is also suitable for:

6701000 oslo

Table of Contents